AUTOFLITE II IN-FLIGHT PROCEDURE
(a)
Engagement
(1)
Check turn command knob in center detent position.
(2)
AutoFlite II master switch - ON.
(b)
Disengagement
(1)
AutoFlite II master switch - OFF.
(c)
Heading Changes
(1)
Move trim knob on instrument for drift correction from a constant heading.
(2)
Move turn command knob for left or right banked turns. Rotation of knob to stop will yield an
appropriate bank angle to obtain an approximate standard rate turn. Intermediate settings
may be used for lesser turn rates.
(d)
OMNI Tracker
(1)
Turn command knob - move to center detent position and push IN to engage tracker.
Aircraft will track desired radial established on NAV 1 (or as selected, if equipped with a
NAV selector switch).
NOTE
Tracker must be engaged within 10° of being “on course,” i.e.
VOR course needle centered and aircraft heading within 10° of
VOR course.
(2)
Trim knob - push IN for high sensitivity. Use high sensitivity position for localizer tracking
and as desired for OMNI tracking.
(e)
Maintain directional trim during all autopilot operations.
PERFORMANCE
No changes to the basic performance provided by Section 5 of this Pilot’s Operating Handbook are
necessary for this supplement.
REPORT: VB-880
ISSUED: DECEMBER 16, 1976
9-4
REVISED: JULY 11, 1977
SECTION 9
PIPER AIRCRAFT CORPORATION
SUPPLEMENTS
PA-28-161, CHEROKEE WARRIOR II
Содержание CHEROKEE WARRIOR II
Страница 253: ...Piper PA 28 161 28 7916159 N3067D ...