Downloaded from www.vandenborre.be
11/5/25
X-HM10_20_En.fm
9
8
7
6
5
4
3
2
1
En-23
Timer and sleep operation (Remote
control only) (continued)
The radio, compact disc, iPod, USB and Line In can all be
turned off automatically.
To confirm the remaining sleep time:
To cancel the sleep operation:
Press the STANDBY/ON button whilst “SLEEP” is
indicated. To cancel the sleep operation without setting the
unit to the stand-by mode, proceed as follows.
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
wake up to CD in the next morning.
l
Do not turn the volume on to full at switch on and listen
to music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
l
Before plugging in or unplugging the headphone,
l
Be sure your headphone has a 3.5 mm diameter plug
and impedance between 16 and 50 ohms. The
recommended impedance is 32 ohms.
l
Plugging in the headphone disconnects the speakers
automatically. Adjust the volume using the VOLUME
control.
l
X-HM20 only: Audio from the iPod/iPhone cannot be
heard via the headphones connected to the unit. “HP
INVALID” will be displayed if you connect the
headphones when the iPod/iPhone function is
selected.
n
Sleep operation
1
Play back the desired sound source.
2
Press the SLEEP button.
3
Within 5 seconds, press the Numeric button to set the
time (1 minute - 99 minutes)
4
“SLEEP” will appear.
5
The unit will enter the power stand-by mode
automatically after the preset time has elapsed. The
volume will be turned down 1 minute before the sleep
operation finishes.
1
Whilst “SLEEP” is indicated, press the SLEEP button.
1
Whilst “SLEEP” is indicated, press the SLEEP button.
2
Within 5 seconds, press the “0” button twice until
“SLEEP 00” appears.
n
To use timer and sleep operation together
1
Set the sleep time (see above, steps 1 - 5).
2
Whilst the sleep timer is set, set the timer playback
(steps 2 - 9, page 22).
Desired time
1-99 minutes
Sleep operation will
automatically stop
Sleep timer
setting
Timer playback
setting
End
time
Timer playback
start time
