Advanced Setup | Firmware Update | Others
in "AV Adjust" - "MCACC" - "Manual EQ Select" (
0
The result may not be as expected depending on the input source and listening mode
setting.
0
If you want to make the adjustments while listening to something, press
on the remote
controller, and select the Preset you want to adjust in "AV Adjust" - "MCACC" - "Manual
EQ Select" (
P40) first.
52
E
N
Surround Right
After selecting the speaker frequency from between "63 Hz" and
"16 kHz" with the cursors
/
, adjust the volume of that
frequency between "-12.0 dB" and "+12.0 dB" with
/
. (Default
Value is "0.0 dB")
0
If an item cannot be selected even though connection is
correct, check that the settings in "System Setup" - "Speaker"
- "Configuration" - "Speaker Channels" (
P44) matches the
number of connected channels.
0
"63 Hz" can only be selected when this speaker is set to
"Large" in "System Setup" - "Speaker" - "Crossover" (
Surround Left
After selecting the speaker frequency from between "63 Hz" and
"16 kHz" with the cursors
/
, adjust the volume of that
frequency between "-12.0 dB" and "+12.0 dB" with
/
. (Default
Value is "0.0 dB")
0
If an item cannot be selected even though connection is
correct, check that the settings in "System Setup" - "Speaker"
- "Configuration" - "Speaker Channels" (
P44) matches the
number of connected channels.
0
"63 Hz" can only be selected when this speaker is set to
"Large" in "System Setup" - "Speaker" - "Crossover" (
Subwoofer
After selecting the speaker frequency from between "31 Hz" and
"250 Hz" with the cursors
/
, adjust the volume of that
frequency between "-12.0 dB" and "+12.0 dB" with
/
. (Default
Value is "0.0 dB")
0
This cannot be selected if "No" is set in "System Setup" -
"Speaker" - "Configuration" - "Subwoofer" (
Front Left
After selecting the speaker frequency from between "63 Hz" and
"16 kHz" with the cursors
/
, adjust the volume of that
frequency between "-12.0 dB" and "+12.0 dB" with
/
. (Default
Value is "0.0 dB")
0
If an item cannot be selected even though connection is
correct, check that the settings in "System Setup" - "Speaker"
- "Configuration" - "Speaker Channels" (
P44) matches the
number of connected channels.
0
"63 Hz" can only be selected when this speaker is set to
"Large" in "System Setup" - "Speaker" - "Crossover" (
Center
After selecting the speaker frequency from between "63 Hz" and
"16 kHz" with the cursors
/
, adjust the volume of that
frequency between "-12.0 dB" and "+12.0 dB" with
/
. (Default
Value is "0.0 dB")
0
If an item cannot be selected even though connection is
correct, check that the settings in "System Setup" - "Speaker"
- "Configuration" - "Speaker Channels" (
P44) matches the
number of connected channels.
0
"63 Hz" can only be selected when this speaker is set to
"Large" in "System Setup" - "Speaker" - "Crossover" (
Front Right
After selecting the speaker frequency from between "63 Hz" and
"16 kHz" with the cursors
/
, adjust the volume of that
frequency between "-12.0 dB" and "+12.0 dB" with
/
. (Default
Value is "0.0 dB")
0
If an item cannot be selected even though connection is
correct, check that the settings in "System Setup" - "Speaker"
- "Configuration" - "Speaker Channels" (
P44) matches the
number of connected channels.
0
"63 Hz" can only be selected when this speaker is set to
"Large" in "System Setup" - "Speaker" - "Crossover" (