Pioneer VSX-AX4AVi-S, Руководство по эксплуатации

Страница: 68 / 88

Controlling the rest of your system
11
68
En
4 Point the two remote controls towards each other
then press the button that will be doing the learning on
this receiver’s remote control.
PRES KEY
starts flashing to indicate the remote is ready
to accept a signal.
• The remote controls should be 3–5 cm apart.
5 Press the corresponding button on the other remote
control that is sending (teaching) the signal to this
receiver’s remote control.
For example, if you want to learn the playback control
signal, press and hold
briefly. The LCD display will
show
OK
if the operation has been learned.
1
If for some reasons the operation hasn’t been learned the
LCD will display
ERROR briefly and then display PRES
KEY again. If this happens, keep pressing the (teaching)
button as you vary the distance between the two remotes,
until the LCD display shows
OK
.
2
Certain buttons represent operations that cannot be
learned from other remote controls.
3
The buttons
available are shown below (with the exception of the TV
controls, a combination of
SHIFT
and these buttons can
also be learned):
6 To program additional signals for the current
component repeat steps 4 and 5.
To program signals for another component, exit and
repeat steps 1 through 5.
7 Press and hold the RECEIVER button for a couple of
seconds to exit and store the operation(s).
Erasing one of the remote control
button settings
This erases one of the buttons you have programmed and
restores the button to the factory default.
1 While pressing the RECEIVER button, press SETUP .
The remote LCD display shows SETUP .
2 Use
/
to select ERASE then press ENTER .
The LCD on the remote prompts you for the component
corresponding to the button setting to be erased.
3 Press the input source button corresponding to the
command to be erased then press ENTER .
The LCD display flashes
PRES KEY
.
4 Press and hold the button to be erased for two
seconds.
The LCD display shows OK or NO CODE to confirm the
button has been erased.
5 Repeat step 4 to erase other buttons.
6 Press and hold the RECEIVER button for a couple of
seconds when you’re done.
Resetting the remote control presets
This will erase all preset remote control preset codes and
programmed buttons.
1 While pressing the RECEIVER button, press SETUP .
The remote LCD display shows SETUP .
2 Use
/
to select RESET then press ENTER .
RESET flashes in the LCD display.
3 Press and hold ENTER for about two seconds .
The LCD shows
OK
to confirm the remote presets have
been erased.
Confirming preset codes
Use this feature to check which preset code is assigned
to an input source button.
1 While pressing the RECEIVER button, press SETUP .
The remote LCD display shows
SETUP
.
2 Use
/
to select READ ID then press ENTER .
The LCD on the remote prompts you for the input source
button you want to check.
Note
1 Note that interference from TVs or other devices will sometimes result in the remote control learning the wrong signal.
2 • Some commands from other remote controls cannot be learned, but in most cases the remotes just need to be moved closer together or farther apart.
• If the remote LCD shows
FULL
, it means the memory is full. See Erasing one of the remote control button settings below to erase a programmed button
you’re not using to free up more memory (note that some signals may take more memory than others).
3 Note that the number key decimal button ( +10 / D.ACCESS ) may not be learned with some components.
3 – 5 cm
SLEEP +
10
SR
+
ANAL
OG
A
T
T
DISC
VIDEO SEL
DIMMER
CL ASS
D.
A C C
ES
S
RECEIVER
SOURCE
SY
STEM OFF
INPUT SELECT
ENTER
TV
C
O
N
TR
O
L
SHIFT
VO
L
DV
D
S A
T
VIDEO 1
T
V C
O NT
DV
R 1
TUNE TUNE
ST
ST
ST
A T
US
MC
A
CC
S.DIRECT
MUL
TI OPE
SIGNAL SEL
SBch
STEREO
MEMOR
Y
TV
C
H
INPUT SELECT
MPX AU
D
IO
SUB
TITLE
AD
V.
SURR
ST ANDARD
ISOPHASE
THX
DT
V INFO
MUTE
REC
TV
V
O L
i P
o d
TUNER
RECEIVER ENTER
REC ST
OP
HDD CH
CH DV
D
AV
P
A R
A
METER
TO
P
MENU
DT
V MENU
CH LEVEL MENU
T.
E D
IT
BAND
GUIDE
RETURN
SETUP
CA
TE
G O
RY
CD
DV
R 2
CD-R TV
V
ID
E O 2
XM R
A DIO
ROOM2/3
DISP
RECEIVER
SLEEP
+10
SR+
ANALOG
ATT
DISC
VIDEO
SEL
DIMMER
CLASS D.ACCESS
RECEIVER SOURCE
SYSTEM OFF
INPUT
SELECT
ENTER
TV CONTROL
DVD SAT VIDEO 1 TV CONT
DVR1
TUNE
TUNE
ST ST
i Pod TUNER RECEIVER
ENTER
AV PARAMETER
TOP MENU
CH LEVEL
MENU
T.EDIT
BAND
GUIDE
RETURN RETURN SETUP SETUP
PTY SEARCH
CD
DVR2 CD-R
TV VIDEO 2
MULTI IN ROOM2/3
TV CONTROL
VOL
STATUS SIGNAL SEL SBch STEREO
TV CH
INPUT
SELECT
MPX EON
A
B C D E
AUDIO SUBTITLE
MUTE REC
TV VOL
REC STOP
HDD
CH CH
DVD
DISP
VSX_AX4AVi.book.fm 68 ページ ２００５年６月２０日 月曜日 午後６時２７分