Pioneer VSX-72TXV, Руководство по обслуживанию

Страница: 258 / 282

VSX-74TXVi
258
1 2 3 4
1 2 3 4
C
D
F
A
B
E
Pin Function
No. Pin Name I/O Function in Slave Mode Function in MasterMode
1 LSDP_TXRX S=I, M=O Low speed data port output Low speed data port input
2 VSS
−
Digital ground Digital ground
3 SC_TX_OUT S=O, M=O System controller bus (CBM) transmit data out System controller bus (CBM) transmit data out
4 VDD
−
+3.3V supply voltage +3.3V supply voltage
5 SC_RX_IN S=I, M=I System controller bus (CBM) receive data in System controller bus (CBM) receive data in
6 VSS
−
Digital ground Digital ground
7 COMMAND_SEL S=I, M=I Command mode select in (1= Command mode, 0= Normal mode) Command mode select in (1= Command mode, 0= Normal mode)
8 VDD
−
+3.3V supply voltage +3.3V supply voltage
9 IRQ# S=O, M=O Interrupt request out (Active Low) Interrupt request out (Active Low)
10 VSS
−
Digital ground Digital ground
11 RESET# S=I, M=I Asynchronous reset in (Active Low) Asynchronous reset in (Active Low)
12 SLAVE_SEL S=I, M=I M/S mode select in (High= Slave mode) M/S mode select in (Low= Master mode)
13 COMM_RX_DIG S=I, M=I DT comm bus external transceiver receive data in DT comm bus external transceiver receive data in
14 COMM_TX_DIG O DT comm bus external transceiver transmit data out DT comm bus external transceiver transmit data out
15 COMM_TX_EN O DT comm bus external transceiver direction out
(1= Transmit, 0= Receive) DT comm bus external transceiver direction out
(1= Transmit, 0= Receive)
16 VSS
−
Digital ground Digital ground
17 VDD
−
+3.3V supply voltage +3.3V supply voltage
18 COMM_RX_P S=I, M=I DT comm bus internal receiver differential positive in DT comm bus internal receiver differential positive in
19 COMM_RX_M S=I, M=I DT comm bus internal receiver differential negative in DT comm bus internal receiver differential negative in
20 VDD
−
+3.3V supply voltage +3.3V supply voltage
21 VSS
−
Digital ground Digital ground
22 COMM_TX_M O DT comm bus internal transmitter differential negative out DT comm bus internal transmitter differential negative out
23 COMM_TX_P O DT comm bus internal transmitter differential positive out DT comm bus internal transmitter differential positive out
24 VSS
−
Digital ground Digital ground
25 VSS
−
Digital ground Digital ground
26 OSC_OUT O Crystal output Crystal output
27 VDD
−
+3.3V supply voltage +3.3V supply voltage
28 OSC_IN S=I, M=I Crystal input Crystal input
29 VSS
−
Digital ground Digital ground
30 TEST S=I, M=I Factory test mode select (1= Test, 0= Normal oper.) Factory test mode select (1= Test, 0= Normal oper.)
31 VSS
−
Digital ground Digital ground
32 HSDP_DATA S=I, M=O High speed data port data input High speed data port data output
33 VDD
−
+3.3V supply voltage +3.3V supply voltage
34 HSDP_CLK S=I, M=O High speed data port clock input High speed data port clock output
35 VSS
−
Digital ground Digital ground
36 HSDP_EN S=O, M=I High speed data port enable output High speed data port enable input
37 I2S_DATA S=I, M=O I2S digital port data in I2S digital audio port data out
38 VSS
−
Digital ground Digital ground
39 I2S_SCLK S=I, M=O I2S digital audio port bit clock in I2S digital audio port bit clock out
40 VDD
−
+3.3V supply voltage +3.3V supply voltage
41 I2S_LRCLK S=I, M=O I2S digital audio port L/R clock in I2S digital audio port L/R clock out
42 VSS
−
Digital ground Digital ground
43 I2S_OCLK S=I, M=O I2S digital audio port oversample clock (Not used.) I2S digital audio port oversample clock out
44 VSS
−
Digital ground Digital ground
45 SAII_CLK S=O, M=I SAII port clock output SAII port clock input
46 VDD
−
+3.3V supply voltage +3.3V supply voltage
47 SAII_DATA S=O, M=I SAII port data output SAII port data input
48 SAII_REQ S=I, M=O SAII port request input SAII port request output