VSX-74TXVi
203
5
6
7
8
5
6
7
8
C
D
F
A
B
E
7.1.4 DIAGNOSIS OF THE HDMI BLOCK AND RELATED SYSTEMS
Please refer to the one point trouble shooting first before checking the flow chart below.
HDMI
Digital Video Converting System
HDMI Audio Pass
Symptom
Remedy
The HDMI indicator blinks
continuously.
Check all the points below.
No picture or sound.
• This receiver is HDCP-compatible. Check that the components you are connecting are also HDCP-
compatible. If they are not, please connect them using the component, S-video or composite video jacks.
• Depending on the connected source component, itís possible that it will not work with this receiver (even
if it is HDCP-compatible).
• If the problem still persists when connecting your HDMI component directly to your monitor, please
consult the component or monitor manual or contact the manufacturer for support.
No picture.
• If your display device is not SD (480i) compatible then neither the setup screens or the 480i to HDMI
converted video will be displayed. In this case, connect using the component, S-video or composite video
jacks.
• Depending in the output settings of the source component, it may be outputting a video format that can't
be displayed. Change the output settings of the source, or connect using the component, S-video or
composite jacks.
No sound, or sound suddenly
ceases.
• Check that the HDMI AV setting is set to
AMP/THROUGH
.
• If the component is a DVI device, use a separate connection for the audio.
• If analog video is being output over HDMI then there will be no HDMI audio output. Please use a separate
connection for the audio.
• Check the audio output settings of the source component.
Note:
1 • An HDMI connection can only be made with DVI-equipped components compatible with both DVI and High Bandwidth Digital Content
Protection (HDCP). If you choose to connect to a DVI connector, you will need a separate adaptor (DVI
→
HDMI) to do so.
A DVI connection, however, does not support audio signals. Consult your local audio dealer for more information.
• This unit has been designed to be compliant with HDMI (High Definition Multimedia Interface) Version 1.1.
Depending on the component you have connected, using a DVI connection may result in unreliable signal transfers. Also, when using
a component with HDMI version 1.0, it is not possible to output copy-controlled DVD-Audio CPPM sources from the HDMI connection.
• SACD playback is not possible when using the HDMI connection.
2 To see this receiver's on-screen display, monitors (or projectors) must be compatible with 480i resolution digital video.
Input
Note: Down converting for component signal is limited with contents with macro vision.
Output
HDMI Terminal
Component
Terminal
S Video Terminal
Composite Video
Terminal
Input
Output
HDMI
→
HDMI
Pre out
SP Out
HDMI Simple Diagnosis