!
Fast forward/reverse
!
Track up/down
!
Pausing
!
Switching the text information
Notes
!
You can also turn this function on or off in the
menu that appears by using
MULTI-CONTROL
.
!
Two iPod can be connected simultaneously to
this unit. Settings are common in
iPod1
and
iPod2
.
!
When the control mode is set to
iPod
, opera-
tions are limited as follows:
—
Functions other than
Control mode
(con-
trol mode),
Pause
(pause) and
Sound Retriever
(advanced sound retrie-
ver) cannot be selected.
—
The volume can only be controlled from
this unit.
!
Turning this function on pauses song play-
back. Operate the iPod to start playback.
Changing audiobook speed
While listening to an audiobook on iPod, play-
back speed can be changed.
1
Display the function menu.
Refer to
Introduction to advanced operations
on page 25.
2
Use MULTI-CONTROL to select
Audiobooks in the function menu.
3
Press MULTI-CONTROL to select your fa-
vorite setting.
Press
MULTI-CONTROL
repeatedly until the
desired setting appears in the display.
!
Faster
–
Playback faster than normal speed
!
Normal
–
Playback in normal speed
!
Slower
–
Playback slower than normal
speed
Using iTunes tagging
This function can be operated with the following
iPod models.
—
iPod fifth generation
—
iPod nano third generation
—
iPod classic
However, tag information can be stored in this
unit even while the other iPod models are used.
It is possible to save the song
’
s information
(tag) from iPod connected to this unit to your
iPod. The songs will show up in a playlist
called
“
Tagged playlist
”
in iTunes the next time
you sync your iPod. Then you can directly buy
the songs you want from iTunes Music Store.
Storing the tag information to
this unit
1
Play songs on the iPod.
2
Press and hold MULTI-CONTROL if TAG
is indicated in the display while desired
song is playing.
#
While storing the tag data on this unit,
TAG
flashes.
3
When completed, TAG Stored and
are displayed.
Storing the tagged information
to your iPod
1
Use MULTI-CONTROL to select
Tags transfer in the function menu.
2
Press MULTI-CONTROL to start transfer-
ring the tag to the iPod.
#
While transferring the tag,
Transferring to iPod
is displayed. In this period,
do not operate this unit.
#
If there are no tags in the connected iPod,
No
tags data
is displayed and this function cannot
be performed.
3
When completed, Tags transferred to
iPod. is displayed and tagged informations
are stored on your iPod.
Note
You can also perform this operation by selecting
iPod1
/
iPod2
from other source. Refer to
Storing
the tagged information to your iPod
on page 15.
Playing songs on iPod
En
27
English
Section
07