Function name
Operation
Play mode
Refer to
Selecting a repeat play
range
on page 19.
However, the repeat play ranges
you can select are different from
that of the built-in CD player. The
repeat play ranges of the multi-CD
player are:
!
M-CD repeat
–
Repeat all
discs in the multi-CD player
!
Track repeat
–
Repeat just the
current track
!
Disc repeat
–
Repeat the cur-
rent disc
Random mode
Refer to
Playing tracks in random
order
on page 19.
Scan mode
Refer to
Scanning folders and
tracks
on page 20.
Pause
Refer to
Pausing playback
on page
20.
TitleInput "A"
Refer to
Entering disc titles
on
page 20.
Notes
!
To return to the playback display, press
BAND/ESC/CANCEL
.
!
If you select other discs during repeat play,
the repeat play range changes to
M-CD repeat
.
!
If you perform track search or fast forward/re-
verse during
Track repeat
, the repeat play
range changes to
Disc repeat
.
!
After track or disc scanning is finished, nor-
mal playback of the tracks begins again.
Using compression and bass
emphasis
You can only use these functions with a multi-
CD player that supports them.
COMP (compression) and DBE (dynamic bass
emphasis) functions lets you adjust the sound
playback quality of the multi-CD player.
1
Display the function menu.
Refer to
Introduction to advanced operations
on the previous page.
2
Use MULTI-CONTROL to select
Compression in the function menu.
#
If the multi-CD player does not support
COMP/DBE,
NO COMP
is displayed when you at-
tempt to select it.
3
Press MULTI-CONTROL to select your fa-
vorite setting.
COMP OFF
—
COMP 1
—
COMP 2
—
COMP OFF
—
DBE 1
—
DBE 2
Using ITS playlists
ITS (instant track selection) lets you make a
playlist of favorite tracks from the multi-CD
player magazine. After you have added your fa-
vorite tracks to the playlist, you can turn on ITS
play and play just those selections.
You can use ITS to enter and play back up to
99 tracks per disc from up to 100 discs (with
the disc titles). (With multi-CD players sold be-
fore the CDX-P1250 and CDX-P650, up to 24
tracks can be stored in the playlist.)
Creating a playlist with ITS programming
1
Play a CD that you want to program.
Push
MULTI-CONTROL
up or down to select
the CD.
2
Display the function menu.
Refer to
Introduction to advanced operations
on the previous page.
3
Use MULTI-CONTROL to select
ITS memo in the function menu.
4
Select the desired track by pushing
MULTI-CONTROL left or right.
5
Push MULTI-CONTROL up to store the
currently playing track in the playlist.
Memory complete
is displayed and the cur-
rently playing selection is added to your play-
list.
6
Press BAND/ESC/CANCEL to return to
the playback display.
Available accessories
En
65
English
Section
13