Basic Operations
5
5
5
1
1
1
1
2
2
2
2
4
4
4
4
3
3
3
1
Band indicator
2
5
(stereo) indicator
Appears when the selected frequency is being
broadcast in stereo.
3
LOC
indicator
Appears when local seek tuning is on.
4
Preset number indicator
5
Program service name
If this unit cannot pick up the program service
name information, broadcast frequency will
be displayed.
%
Select a band
Press
BAND/ESC/CANCEL
.
#
Band can be selected from among
FM1
,
FM2
,
FM3
or
AM
.
%
Manual tuning (step by step)
Push
MULTI-CONTROL
left or right.
%
Seek tuning
Push and hold
MULTI-CONTROL
left or right,
and then release.
#
You can cancel seek tuning by pushing
MULTI-CONTROL
left or right.
#
While pushing and holding
MULTI-CONTROL
left or right, you can skip stations. Seek tuning
starts as soon as you release
MULTI-CONTROL
.
Storing and recalling
broadcast frequencies
You can easily store up to six broadcast fre-
quencies for later recall.
!
Six stations for each band can be stored in
memory.
1
Press
/LIST.
Preset screen is displayed.
2
Use MULTI-CONTROL to store the se-
lected frequency in memory.
Turn to change the preset number. Press and
hold to store.
3
Use MULTI-CONTROL to select the de-
sired station.
Turn to change the station. Press to select.
#
You can also change the station by pushing
MULTI-CONTROL
up or down.
#
To return to the ordinary display, press
BAND/ESC/CANCEL
or
/
LIST
.
#
If you do not operate the list within about 30
seconds, the display automatically returns to the
ordinary display.
Switching the display
Desired information can be displayed while
tag information has been broadcasting.
%
Press DISP/SCRL.
Press
DISP/SCRL
repeatedly to switch between
the following settings:
Frequency or program service name
—
song
title and artist name
Using iTunes tagging
This function can be operated with the following
iPod models.
—
iPod fifth generation
—
iPod nano third generation
—
iPod classic
However, tag information can be stored in this
unit even while the other iPod models are used.
Tuner
En
14
Section
04