S/W update
(updating the software)
This function is used to update this unit with the lat-
est software. For information on the software and up-
dating, refer to our website.
!
Never turn the unit off while the software is being
updated.
1
Press
M.C.
to display the data transfer mode.
Follow the on-screen instructions to finish updat-
ing the software.
Note
Operation is complete even if the menu is can-
celled before being confirmed.
Other Functions
Using an AUX source
Up to two auxiliary devices such as VCR or
portable devices (sold separately) can be con-
nected to this unit. When connected, auxiliary
devices are automatically read as AUX sources
and assigned to
AUX1
or
AUX2
. The relation-
ship between
AUX1
and
AUX2
sources is ex-
plained below.
About
AUX1
and
AUX2
There are two methods to connect auxiliary de-
vices to this unit.
AUX1
source:
When connecting auxiliary device using a stereo
mini plug cable
%
Insert the stereo mini plug into the
AUX input jack.
For more details, refer to the installation man-
ual.
This auxiliary device is automatically set to
AUX1
.
AUX2
source:
When connecting an auxiliary device using an
IP-BUS-RCA Interconnector (sold separately)
%
Use an IP-BUS-RCA Interconnector such
as the CD-RB20/CD-RB10 (sold separately)
to connect this unit to an auxiliary device
featuring RCA output.
For more details, refer to the IP-BUS-RCA Inter-
connector owner
’
s manual.
This auxiliary device is automatically set to
AUX2
.
#
This type of connection can only be made if
the auxiliary device has RCA outputs.
Selecting AUX as the source
%
Press SRC/OFF to select AUX as the
source.
#
AUX cannot be selected unless the auxiliary
setting is turned on. For more details, refer to
Using the PGM button
You can operate the preprogrammed functions
for each source by using
PGM
.
%
Press PGM to turn pause on when se-
lecting the following sources:
!
CD
–
CD player
!
USB
/
USB-iPod
–
USB/iPod
#
To turn pause off, press
PGM
again.
%
Press PGM and hold to turn BSM on
when selecting tuner or
“
HD Radio
”
as the
source.
Press
PGM
and hold until the BSM turns on.
#
To cancel the storage process, press
PGM
again.
En
21
English
Section
02
Operating this unit
Содержание Super Tuner IIID DEH-P6200BT
Страница 115: ...Es 115 Español ...