3
Turn M.C. to select the initial setting.
After selecting, perform the following proce-
dures to set the initial setting.
Language
(multi language)
Menu language related to Bluetooth telephone can
be changed.
!
Some characters may not be displayed properly.
1
Press
M.C.
to display the setting mode.
2
Turn
M.C.
to select the language.
English
—
ESPAÑOL
Clock set
(setting the clock)
1
Press
M.C.
to display the setting mode.
2
Press
M.C.
to select the segment of the clock dis-
play you wish to set.
Hour
—
Minute
As you select segments of the clock display, the
selected segment flashes.
3
Turn
M.C.
to adjust the clock.
Clock
(clock on/off setting)
1
Press
M.C.
to turn the clock display on or off.
Warning
(warning tone setting)
If the front panel is not detached from the head unit
within four seconds of turning off the ignition, a warn-
ing tone sounds. You can turn off the warning tone.
1
Press
M.C.
to turn the warning tone on or off.
AUX1
/
AUX2
(auxiliary input setting)
Activate this setting when using an auxiliary device
connected to this unit.
1
Press
M.C.
to turn
AUX
on or off.
USB PnP
(plug and play)
This setting allows you to switch your source to
USB
/
USB-iPod
automatically.
1
Press
M.C.
to turn the plug and play on or off.
ON
–
When USB storage device/iPod is con-
nected, the source is automatically switched to
USB
/
USB-iPod
. If you disconnect your USB sto-
rage device/iPod, this unit
’
s source is turned off.
OFF
–
When USB storage device/iPod is con-
nected, the source is not switched to
USB
/
USB-
iPod
automatically. Please change the source to
USB
/
USB-iPod
manually.
Brightness
(display brightness setting)
1
Press
M.C.
to display the setting mode.
2
Turn
M.C.
to switch the brightness setting.
High
(high)
—
Low
(low)
3
Press
M.C.
to confirm the selection.
SW control
(rear output and subwoofer setting)
This unit
’
s rear output (rear speaker leads output) can
be used for full-range speaker (
Full
) or subwoofer
(
SUBW
) connection. If you switch the rear output set-
ting to
SUBW
, you can connect a rear speaker lead di-
rectly to a subwoofer without using an auxiliary amp.
1
Press
M.C.
to switch the rear output setting.
!
When no subwoofer is connected to the rear
output, select
Full
(full-range speaker).
!
When a subwoofer is connected to the rear
output, select
SUBW
(subwoofer).
DEMO
(demo display setting)
1
Press
M.C.
to turn the demo display on or off.
Ever SCRL
(scroll mode setting)
When Ever Scroll is set to ON, recorded text informa-
tion scrolls continuously in the display. Set to OFF if
you prefer the information to scroll just once.
1
Press
M.C.
to turn the ever scroll on or off.
BT clear
(resetting the Bluetooth wireless technology
module)
Bluetooth telephone data can be deleted. To protect
personal information, we recommend deleting this
data before transferring the unit to other persons. The
following settings will be deleted.
!
phone book entries on the Bluetooth telephone
!
preset numbers on the Bluetooth telephone
!
registration assignment of the Bluetooth tele-
phone
!
call history of the Bluetooth telephone
!
information of the connected Bluetooth telephone
1
Press
M.C.
to show the confirmation display.
YES
is displayed. Clearing memory is now on
standby.
If you do not want to reset phone memory, push
M.C.
left. The display reverts.
2
Press
M.C.
to clear the memory.
Cleared
is displayed and the settings are deleted.
!
While this function is in use, do not turn off
the engine.
BT VER INFO
(Bluetooth version display)
You can display the system versions of this unit and
of Bluetooth module.
1
Press
M.C.
to display the information.
En
20
Section
02
Operating this unit
Содержание Super Tuner IIID DEH-P6200BT
Страница 115: ...Es 115 Español ...
