Pioneer Super Tuner IIID DEH-P6200BT, Руководство по эксплуатации

Страница: 18 / 116

Phone book (phone book)
!
The phone book in your cellular phone will be
transferred automatically when the phone is con-
nected to this unit.
!
Depending on the cellular phone, the phone book
may not be transferred automatically. In this case,
operate your cellular phone to transfer the phone
book. The visibility of this unit should be on. Refer
to
Visible
(setting the visibility of this unit) on the
previous page.
1
Press
M.C.
to display
ALPH SRCH
(alphabetical
list).
2
Turn M.C. to select the first letter of the name you
are looking for.
!
Press and hold M.C. to select the desired
character type.
3
Press M.C. to display a registered name list.
4
Turn M.C. to select the name you are looking for.
5
Press M.C. to display the phone number list.
6
Turn M.C. to select a phone number you want to
call.
!
When you find a phone number that you want
to store in memory, press and hold one of the
preset tuning buttons (
1
to
6
).
!
Press one of preset buttons
1
to
6
to recall the
desired preset number.
7
Press M.C. to make a call.
Dial preset (preset phone numbers)
1
Press
M.C.
to display the setting mode.
2
Use
M.C.
to select the desired preset number.
Turn to change the menu option. Press to select.
!
You can also press one of the preset number
buttons
1 to 6 to select a number.
3
Press M.C. to make a call.
Phone FUNC (phone function)
You can set Auto ANSR and Ring tone from this
menu. For details, refer to Function and operation on
this page.
Function and operation
1 Display Phone FUNC.
Refer to Phone FUNC (phone function) on this
page.
2 Press M.C. to display the function
menu.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
Auto ANSR (automatic answering)
1
Press
M.C.
to turn automatic answering on or off.
Ring tone
(ring tone select)
1
Press M.C. to turn the ring tone on or off.
Audio Adjustments
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select AUDIO.
3 Turn M.C. to select the audio function.
After selecting, perform the following proce-
dures to set the audio function.
FAD/BAL (fader/balance adjustment)
1
Press M.C. to display the setting mode.
2
Press
M.C.
to cycle between fader and balance.
3
Turn
M.C.
to adjust the speaker balance.
Adjustment range (front/rear):
F-F15
to
F-R15
Adjustment range (left/right): B-L15 to B-R15
!
Select F-0 when only using two speakers.
!
When the rear output setting is SUBW , you
cannot adjust front/rear speaker balance.
Refer to
SW control (rear output and subwoo-
fer setting) on page 20.
Preset EQ (equalizer recall)
1
Press M.C. to display the setting mode.
2
Turn M.C. to select an equalizer curve.
Powerful
—
Natural
—
Vocal
—
Custom1
—
Cus-
tom2
—
Flat
—
Super bass
!
When Flat is selected no adjustments are
made to the sound.
3
Press M.C. to confirm the selection.
Graphic EQ (equalizer adjustment)
En
18
Section
02
Operating this unit