Pioneer Super Tuner IIID DEH-P6200BT, Руководство по эксплуатации

Страница: 24 / 116

Basic Operations
Select an XM band.
1
Press
BAND
/
ESC
.
!
Band can be selected from XM1 , XM2 or
XM3
.
Selecting a channel (step by step)
1
Push M.C. left or right.
!
If you push and hold M.C. left or right, you
can increase or decrease the channel number
continuously.
!
You can also perform tuning from a desired
channel category. (Refer to
Selecting a chan-
nel from a channel category on this page.)
Switching the XM display
1
Press and hold / DISP / SCRL .
Storing and recalling stations
Operations are the same as those of the tuner.
(Refer to
Storing and recalling stations on page
11.)
Selecting an XM channel directly
When using the optional remote control, you
can select the channel directly by entering the
desired channel number.
1
Press DIRECT .
The channel number input display appears.
2
Press
0
to
9
to enter the desired channel number.
!
You can cancel the input number by pressing
CLEAR
.
3
Press DIRECT .
The channel of the entered number is selected.
!
After entering the number input mode, if you
do not perform an operation within about
eight seconds, the mode is automatically can-
celed.
Advanced operations using
special buttons
Selecting the channel select mode
1
Press S.Rtrv / SAT repeatedly to select the desired
channel select setting.
CH number (channel number select setting)
—
Category
(channel category select setting)
Function settings
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
CH select
(channel select mode setting)
You have two methods for selecting a channel: by
number and by category. When selecting by number,
channels in any category can be selected. Select by
category to narrow your search down to only chan-
nels in a particular category.
1
Press
M.C.
to display the setting mode.
2
Turn M.C. to select the desired setting.
CH number
(channel number select setting)
—
Category (channel category select setting)
Note
Operation is complete even if the menu is can-
celled before being confirmed.
Selecting a channel from a
channel category
1 Switch the channel select settings to
Category.
Refer to Selecting the channel select mode on
this page or
CH select
(channel select mode
setting) on this page.
En
24
Section
03
Available accessories