1 Touch A.MENU and AUDIO and then
touch LOUDNESS.
2 Touch
to turn loudness on.
#
To turn loudness off, touch
.
3 Touch
or
to select a desired level.
Each time you touch
or
selects level in
the following order:
LOW
(low)
MID
(mid)
HIGH
(high)
Using subwoofer output
This unit is equipped with a subwoofer output
which can be turned on or off.
!
When the subwoofer output is on, you can
adjust the cut-off frequency and the output
level of the subwoofer.
1 Touch A.MENU and AUDIO and then
touch SUB WOOFER.
#
When the subwoofer controller setting is
FULL
, you cannot select
SUB WOOFER
.
2 Touch
to turn subwoofer output on.
#
To turn subwoofer output off, touch
.
3 Touch
and then touch
or
to se-
lect the phase of subwoofer output.
Touch
to select normal phase and
NORMAL
appears in the display. Touch
to
select reverse phase and
REVERSE
appears in
the display.
4 Touch
and then touch
or
to ad-
just the output level of the subwoofer.
Each time you touch
or
increases or de-
creases the level of the subwoofer.
+6
6
is
displayed as the level is increased or de-
creased.
5 Touch
and then touch
or
to se-
lect cut-off frequency.
Each time you touch
or
selects cut-off
frequencies in the following order:
50Hz
80Hz
125Hz
Only frequencies lower than those in the se-
lected range are outputted from the sub-
woofer.
Using nonfading output
When the nonfading output setting is on, the
audio signal does not pass through this unit
s
low pass filter (for the subwoofer), but is out-
putted through the RCA output.
1 Touch A.MENU and AUDIO and then
touch NON FADING.
#
When the subwoofer controller setting is only
FULL
, you can select
NON FADING
. (Refer to
page 83.)
2 Touch
to turn non fading output on.
#
To turn non fading output off, touch
.
3 Touch
or
to adjust the output
level of the non fading.
Each time you touch
or
increases or de-
creases the level of the non fading.
+6
6
is
displayed as the level is increased or
decreased.
Using the high pass filter
When you do not want low sounds from the
subwoofer output frequency range to play
from the front or rear speakers, turn on the
HPF (high pass filter). Only frequencies higher
than those in the selected range are outputted
from the front or rear speakers.
Audio Adjustments
En
62
Section
13
