Installing and connecting the unit
03
11
2
Wire the unit.
In order to make the wiring process as easy as possible,
complete all wiring prior to placing the TV on top of the unit.
Note
• Some connected devices (TV and set top box etc.) have
settings for the digital audio output. For details, see the
operating instructions for the specific playback device.
• Digital audio input (COAXIAL, OPTICAL) supports input
signals with sampling frequencies of 32 kHz, 44.1 kHz,
48 kHz, 88.2 kHz, and 96 kHz.
Connecting antenna
Connect the DAB/FM wire antenna into the DAB/FM antenna
socket.
For best results, extend the DAB/FM antenna fully and fix to a
wall or door frame. Don’t drape loosely or leave coiled up.
Using external antennas
To improve DAB/FM reception and sound quality
Use a PAL connector (not supplied) to connect an external
DAB/FM antenna.
Optical digital
audio cable
(included)
Analog cable
(commercially
available)
Remove the protection cap at
the end and then connect the
cable while paying attention to
the orientation of the connector.
If you will not use the
cable for your TV
connection, you can
use it to connect
another audio device.
If your TV does not
have a digital
terminal, connect it to
the analog terminal.
Digital audio pin cable
(commercially available)
BD/DVD
DAB/FM wire antenna
(included)
75
coaxial cable
One-touch PAL
connector
03_Connections.fm 11 ページ 2015年6月2日 火曜日 午後4時54分