Basic operation
05
17
Chapter 5:
Basic operation
Outputting the sound of a device
connected to the unit
The following describes the procedure up until listening to the
sound of a device connected to the unit.
1
Turn on the power of the connected device.
2
Press
STANDBY/ON to turn the power on.
3
Press INPUT SELECT or an input selection
button on the remote control.
Switch to the input you wish to play and then start playback
on the connected device.
4
Press the VOLUME to adjust the volume.
To temporarily mute the sound, press the
MUTE
. Press the
button again or adjust the volume to cancel mute.
Note
• When the unit is connected to a TV, set the volume to the
minimum level or mute the sound. Also, if the TV speaker
sound can be turned off in the settings menu of the TV,
set it to OFF.
Linking power for the unit and a TV
If a TV is connected to the unit’s optical digital audio input
terminal and the
Wake Up TV
function is turned
ON
, then the
power for the unit will come on when the TV is turned on, and
the unit will switch to Optical In.
1
Press HOME MENU.
2
Press
/
to select “Wake Up TV”, then
press ENTER.
3
Press
/
to select “ON” or “OFF”, then
press ENTER.
SBX-B70D.book 17 ページ 2015年4月13日 月曜日 午後2時6分