10
Using the Timer
60
En
4 Press TIMER/CLOCK ADJ.
5 Turn the JOG dial until the display shows TIMER, then
press SET.
6 Set the record start time.
Use the
JOG
dial to set the hour, then press
SET
. Set the minute in
the same way, pressing
SET
when you’re done.
7 Set the record end time.
Use the
JOG
dial to set the hour, then press
SET
. Set the minute
in the same way, pressing
SET
when you’re done.
The switch-on and switch-off times are confirmed in the display
after pressing
SET
this last time.
8 Switch the system into standby mode.
9 Press TIMER/CLOCK ADJ.
10 Turn the JOG dial until the display shows REC, then
press SET.
The record timer indicator ( and
REC
) lights in the display and
record timer setup is complete!
Note:
There is no way to edit the timer settings once made. If
you make a mistake, work through the rest of the settings, then
start over.
Canceling the timer
Here’s how to cancel the wake-up or record timer (whichever has
been set):
1 In standby mode, press TIMER/CLOCK ADJ.
2 Turn the JOG dial until the display shows OFF, then
press SET.
JOG
JOG
SET
TIMER/CLOCK ADJ
