4
Getting Started
24
En
Switching on and setting the
clock
You should now have your system installed with everything
connected up and plugged in. After switching on, the first thing to
do is to set the clock. This only needs to be done once (unless all
power to the unit is cut) and will enable you to use the timer
features.
Use the front panel controls to do this.
1 Press STANDBY/ON
• Pressing again switches the unit back into standby mode.
2 Press TIMER/CLOCK ADJ.
3 Turn the JOG dial until CLK ADJ (clock adjust) appears
in the display.
If this is the first time you’ve switched on the unit,
CLK
ADJ
should already be displayed.
4 Press SET.
5 Turn the JOG dial to select 12 or 24 hour clock
format.
This setting affects the clock and timer setting displays. Choose the
format you prefer.
6 Press SET.
7 Use the JOG dial to set the hour.
8 Press SET.
9 Use the JOG dial to set the minute.
10 Press SET to finish.
• Press
DISPLAY
MODE
(front panel) or
DISPLAY
(remote)
anytime to show the current time. The display will revert to its
previous state after about five seconds.
Tip
There are a number of buttons other than
STANDBY
/
ON
which
will switch the unit on. Pressing any of the function select buttons
(
CD
,
TUNER
/
BAND
,
TAPE
I
/
II
,
AUX
) when the unit is in
standby mode will turn the unit on and switch to that function.
Pressing the disc tray
OPEN
/
CLOSE
button will also switch the
power on and select the CD function.
If you press
CD
with a disc loaded, the disc will also start playing.
Likewise, if there is a tape loaded and you press
TAPE
I
/
II
, the
tape will begin playing.
Pressing
26
will switch on the power and start playing the
last selected function.
OPEN/CLOSE
TAPE
TUNER/BAND
AUX
CD
DISPLAY
JOG
STANDBY/ON
JOG
SET
TIMER/CLOCK ADJ
DISPLAY MODE
OPEN/CLOSE
23
/
8
Function select buttons
功能選擇按鈕
Teclas de selección de función
