Settings
Prior to using this product and the connected Dash Camera, configure the ACC linkage settings, voltage
cutoff settings, and timer off settings.
ACC linkage switch
Voltage cutoff/Timer off settings switch
Up: ON
Down: OFF
ACC linkage settings
Operate the ACC linkage switch in accordance with the specifications of the Pioneer Dash Camera
connecting to this product.
(Factory default: B mode)
Switch position
A mode
B mode
Specifications
of Pioneer Dash
Camera to connect
ACC-linked Dash Camera
Non-ACC-linked Dash Camera
Operation after
connection
After turning the engine off (ACC off),
parking mode is activated.*
After turning the vehicle engine off (ACC
off), normal recording will continue
until the vehicle battery voltage drops
below the voltage cutoff settings value,
or the time set in the timer off settings is
reached.
Note
In A mode, the timer settings for this product will be disabled.
* For details of operating conditions for parking mode, refer to the manual of the connected Dash Camera.
Check supported models at the Pioneer website.
U.S.:
https://www.pioneerelectronics.com
Canada:
https://www.pioneerelectronics.ca