Before Installing the Product
Installation Precautions
Use the included double-sided tape to securely affix the product to the vehicle.
Bottom surface
Double-sided tape application position
Recommended mounting locations are within the inside the kick panel or glove compartment.
Mount on a flat, oil-free surface.
Mounting on anything other than a flat surface may result in the product falling off. Additionally, there is a
risk of malfunction.
Mount in a location in which the product can be firmly secured. Ensure that you do not mount on places in
the vehicle that are subject to strong vibration such as the spare wheel cover board or the cargo area in a
hatchback.
Mounting using other than the specified mounting methods may result in diminished performance. Ad-
ditionally, there is a risk of malfunction.
Do not mount in the following types of locations. Failure due to high temperatures may occur.
* Locations subject to direct sunlight such as on the dashboard or the cargo area in a hatchback
* Near the heater outlet
Do not mount in locations that may be exposed to rain or liquids, such as near a door opening or cup holder.
Do not mount in locations that tend to accumulate dust or dirt.
Do not cover with carpet or other material.
Mount in a location in which the cables are not subject to significant shocks.
Avoid mounting this product in locations in which it may be kicked or have heavy loads placed upon it.
CAUTION
If the fuse is blown, then replace it with a new standard glass tube fuse (diam. 5.2 mm/length 20 mm), and
tighten the tip fully.
Ensure that the fuse is replaced with one of the rated type and capacity (F 2 A L/250 V, F 500 mA L/250 V).
English
