Additional information
14
108
En
Chapter 14
Additional information
Resetting the recorder
If you need to, you can reset the recorder to all its factory
settings.
1
Make sure that the recorder is on.
2
Press and hold
STOP and press
STANDBY/
ON.
The recorder turns off with all settings reset.
Setting up the remote to control your
TV
You can use the supplied remote to control your TV. To be
able to use this feature you first have to program the
remote with a maker code from the table below.
1
Press and hold down the CLEAR button, then
enter the maker code for your TV.
The LED indicator on the remote controls lights.
See the table below for the list of maker codes. If there is
more than one code given for your make, input the first
one in the list.
• If the maker’s name of your TV doesn’t appear in the
table below, you will not be able to use this remote to
control your TV.
2
Press
TV to check that the remote works with
your TV.
If the remote is set up correctly, the TV should switch on/
off. If it doesn’t and there is another code given for your
maker, repeat step
1
with a new code.
Using the TV remote control buttons
The table below shows how to use this remote control
with your TV.
Button
What it does
TV
Press to switch the TV on/off (standby)
INPUT SELECT
Press to change the TV’s video input
TV VOLUME
Use to adjust the TV volume
TV CHANNEL
Use to change TV channels
Maker
Code
Aiwa
38
Funai
36
GE
11, 28
General
34
Goldstar
10, 23
Grandiente
30
Hitachi
06, 24, 25, 32
Magnavox
12, 29
Mitsubishi
09
NEC
37
Panasonic
08, 22, 41
Philips
07
Pioneer
00, 35, 40, 44
RCA
01, 15, 16, 17, 18
Sanyo
14, 21
Sharp
02, 19, 27
Sony
04
Toshiba
05, 26, 31, 43
Victor
13, 33, 42
Zenith
03, 20
