Pioneer PRV-9200, Руководство по эксплуатации

Страница: 100 / 124

The Initial Setup menu
13
100
En
DV Input
• Default setting:
Stereo1
You need to set this if you have a camcorder using 32kHz/
12-bit sound connected to the front panel
DV IN/OUT jack.
Some digital camcorders have two stereo tracks for
audio. One is recorded at the time of shooting; the other
is for overdubbing after shooting.
On the Stereo1 setting, the sound that was recorded
while shooting is used. On the Stereo2 setting, the
overdubbed sound is used. You can also choose a Mix
setting of 25%, 50% or 75% for the Stereo 1 with a
corresponding Stereo 2 setting of 75%, 50% or 25%.
Input Level (L1 / L2 / L3)
• Default setting: 0dB
You can adjust the gain of the audio from each external
input individually, from
–6dB
to
+6dB
in steps of 3 dB to
optimize the recorded audio level.
Audio Out settings
Digital Out
• Default setting: On
If at any time you need to switch off the digital audio
output, set this to
Off
, otherwise leave it
On
.
Note
• When set to
Off
, all the other
Audio Out
settings are
grayed out and can’t be set.
Dolby Digital Out
You only need to make this setting if you connected this
recorder to an AV amp/receiver (or other component) using
the digital output.
• Default setting:
Dolby Digital
If your AV amp/receiver (or other connected component)
is Dolby Digital compatible, set to
Dolby Digital ,
otherwise set to
Dolby Digital PCM
. Check the
manual that came with the connected component if
you’re unsure whether it is Dolby Digital compatible.
DTS Out
You only need to make this setting if you connected this
recorder to an AV amp/receiver (or other component) using
the digital output.
• Default setting:
On
If your AV amp/receiver (or other connected component)
has a built-in DTS decoder, set to
On , otherwise set to
Off
. Check the manual that came with the connected
component if you’re unsure whether it is DTS
compatible.
Important
• If you set to On with a non-DTS compatible amp/
receiver, noise will be output when you play a DTS
disc.
• When set to On , there is no analog audio output
when playing a DTS DVD-Video disc.
• When playing a DTS audio CD (even when
DTS Out
is Off ), noise is output from the analog outputs. Do
not play this through your amplifier and speakers.
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback External Audio
Dual Mono Recording
DV Input
Input Level (L1)
Input Level (L2)
Input Level (L3)
Stereo1
Stereo2
Mix (Stereo1: 75%)
Mix (Stereo1: 50%)
Mix (Stereo1: 25%)
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback External Audio
Dual Mono Recording
DV Input
Input Level (L1)
Input Level (L2)
Input Level (L3)
+6dB
+3dB
0dB
– 3dB
– 6dB
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Digital Out
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out On
Off
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Digital Out
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out Dolby Digital
Dolby Digital
PCM
Initial Setup
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback Digital Out
Dolby Digital Out
DTS Out
96kHz PCM Out
MPEG Out On
Off
Initial Setup