23
Special Installation (Embedding in the wall)
A
A
A
X
(Front of the unit)
<Viewed from Above>
<Viewed from the Right Side>
✩
Operating Temperature Restrictions
Temperature in space X and Y
A: 0 to 300 mm
0 to 40 °C
* The same operating temperature restrictions apply to the speaker system (PDP-S29-LR).
Y
(Rear of the unit)
2.4.3 Embedding in the wall
Carefully read the following before trying to embed the unit in a wall, and make sure to observe all the limitations specified
below.
Be sure to mount the unit so that twisting, bending, or other deformation of the unit does not exceed 4 mm.
(1) Embedding in walls with space provided behind the unit (With no obstructions within a distance of 300 mm from
the back surface of the unit).
A
Methods of Securing: Basic methods of securing are shown below. Avoid blocking or covering areas aside from those
indicated by
. Before attaching the unit to fittings, double-check that the thickness and height
of the fittings, and the number of fixing bolts is correct. (Also refer to 2.4.1 “Mounting to fittings
(pg. 21)”.)
Temperature Measurement Points (Illustration for reference purposes)
• Make measurements at a distance of 50 mm from the unit, without directly subjecting the thermometer to fan exhaust.
• For spaces where temperature fluctuations are likely, gather additional measurement points for an adequate data set.
: Thermometer (temperature measurement point)
50mm
50mm
