Pioneer PDP-614MX Скачать руководство пользователя страница 1

Страница: 1 / 89

PLASMA DISPLAY MONITOR: PDP-614MX/PDP-61MXE1
TABLE TOP STAND: PDK-TS06

SPEAKER SYSTEM: PDP-S29-LR

PLASMA DISPLAY WALL-MOUNT HARDWARE: PDK-WM03

ABOUT MOUNTING/INSTALLATION

This product is sold under the assumption that

installation will be performed by experienced,

qualified experts. Refer all mounting and installation

work to qualified personnel, or consult the nearest

PIONEER dealer for assistance.

We accept no responsibility for accident or loss

resulting from failure to select an appropriate

installation site, or for those occurring during

assembly, installation, mounting, or operation of

this product, or resulting from modifications made

to this product, or from natural disasters.

PRECAUTIONS:

• We accept no responsibility for losses resulting from the

use of parts other than those supplied by us.

• We guarantee the performance of our products only when

they are assembled and adjusted as described in this

manual.

• The specifications and external designs shown in this

manual are subject to change without notice.

CAUTION

Exclamation marks placed within triangles are

intended to alert users to the presence of important

safety information. Be sure to read instructions indicated

by this symbol.

This manual provides precautions and information for installation, preparation, and handling of the plasma display and its

dedicated mounting hardware.

Before installation and preparatory work, choose a safe and appropriate site after thorough consideration of construction,

materials used, strength, and surroundings. If adequate safeguards are not in place, immediately halt the installation

process and discontinue marketing activities.

TECHNICAL MANUAL

(Ver. 1.0)

Содержание PDP-614MX


























































































Результаты поиска

Содержание PDP-614MX

Отзывы:

Похожие инструкции для PDP-614MX

Бренды по названию

Популярные бренды

Pioneer PDP-614MX, Техническое руководство

Результаты поиска

Содержание PDP-614MX

Отзывы:

Похожие инструкции для PDP-614MX

Бренды по названию

Популярные бренды