Pioneer PDK-5001 Скачать руководство пользователя страница 61

Страница: 61 / 115

Before Beginning Adjustments

Action

Enters Menu mode.

At this time, the only available RS-232C commands are:

• <AJY>

• <POF>

Menu mode is disabled and RS-232C adjustment mode

is activated. At this time, only the following options are

available from the remote(or the operating panel of the

main unit):

• Power switch

• MENU button

• KEY LOCK/UNLOCK button

3) Integrator Mode

This mode provides adjustment functions for the integrator.

White balance adjustment and various other setting items are available in addition to those in Menu mode.

Refer to “5.4 Integrator Mode” for further details.

4) RS-232C Adjustment Mode

This mode enables various adjustments and settings using a PC.

Some adjustment items are available only in this mode.

Refer to “5.5 RS-232C Adjustment Mode” for further details.

Combination use of remote, Unit operation panel, and PC.

5.1.2 Combination in use of remote, unit operating panel, and PC

• The remote, and the operating panel of the main unit may be used together.

Example: You can enter Menu mode through the operating panel of the main unit, then make adjustments

using the remote.

• Depending on which has transmitted the more recent command, either the remote or the operating panel(of the

main unit), or RS-232C may originate the command currently in effect.

Example:

Operation

Press the MENU button on the remote

(or on the operating panel of the main

unit)

Now, issue an <AJY> command from

a PC.

NOTE: The remote does not have a KEY LOCK/UNLOCK button.

Содержание PDK-5001




















































































































Результаты поиска

Содержание PDK-5001

Отзывы:

Похожие инструкции для PDK-5001

Бренды по названию

Популярные бренды

Pioneer PDK-5001, Техническое руководство

Результаты поиска

Содержание PDK-5001

Отзывы:

Похожие инструкции для PDK-5001

Бренды по названию

Популярные бренды