Pioneer PDK-5001 Скачать руководство пользователя страница 37

Страница: 37 / 115

Handling the Standard Mounting Equipment

4.2 Handling the Standard Mounting Equipment

4.2.1 Handling precautions

This section of the manual discusses ways to mount, install, and handle the mounting equipment exclusively designed

for our plasma displays. Mounting should be performed by qualified experts. Refer all installation and mounting work to

qualified persons, or request assistance from a Pioneer dealer.

4.2.2 Precautions for installation contractors

1) Before starting installation

Read the specifications provided in 3.1 Installation Conditions.

2) During installation

Carefully read the discussion provided in this section of the manual. The installation work should be performed by

more than two people.

3) After installation

After installing the mounting equipment, check for adequate strength and properly tightened screws. Repeat this

inspection after mounting the display.

4) Delivering to the customer

(1)Explaining operating precautions

We ask the mounting contractor to explain the following precautions to the customer after mounting and installation

work is complete. Even if the particulars of an installation happen to be letter-perfect, your work may be perceived

as inadequate unless you are patient and thorough in providing these precautions.

The following are highly dangerous and must be avoided at all times:

• Any sudden application of force, including pushing or pulling

• Splashing water on the unit

• Placing any object on the unit

• Touching mount screws and other mounting components

For worry-free use of the unit:

• If any problem arises, the user should immediately ask the installation contractor to conduct inspections and

repairs.

• To guard against accidents, ask the user not to make any tilt or height adjustments. Such work should be

referred to the installation contractor.

(2)Mounting contractor contact form

We ask the mounting and installation contractor to complete the contractor contact form supplied with the unit

and to give it to the end-user after post-installation inspections are complete and the above precautions have been

explained.

(3)Periodic inspection

Over time, various internal parts or components of the suspension/mounting hardware may render the installation

unreliable, possibly leading to the display breaking free of its mounting. Please recommend periodic inspections.

Содержание PDK-5001




















































































































Результаты поиска

Содержание PDK-5001

Отзывы:

Похожие инструкции для PDK-5001

Бренды по названию

Популярные бренды

Pioneer PDK-5001, Техническое руководство

Результаты поиска

Содержание PDK-5001

Отзывы:

Похожие инструкции для PDK-5001

Бренды по названию

Популярные бренды