Setting up
08
27
En
E
n
glish
Chapter 8
Setting up
Setting up TV channels
This section describes how to automatically search for and set up
TV channels.
Using Auto Installation
When the flat screen TV is switched on for the first time after
purchase, the initial auto installation is initiated. You can
automatically set language, country and channels in successive
operations.
1
Select “Language” (
/
).
2
Select a language (
/
).
You can select from among 19 languages; English, German, French,
Italian, Spanish, Dutch, Swedish, Portuguese, Greek, Finnish,
Russian, Turkish, Norwegian, Danish, Czech, Polish, Ukrainian,
Hungarian, and Croatian.
3
Select “Country” (
/
).
4
Select the country (
/
).
5
Select “Tuner Type” (
/
).
6
Select a tuner type (
/
).
You can select among three options; “All”, “Digital”, and
“Analogue”.
7
Select “Aerial Power” (
/
).
Only selectable when “Digital” or “All” is selected for “Tuner Type” in
step 5. If not go to step 9.
Caution
• When the “Aerial Power” setting is on, directly connect the
aerial to the ANT input terminal at the rear of the flat screen TV.
Connecting any device between the aerial and flat screen TV
may cause damage to the device.
8
Select “On” or “Off” (default)(
/
).
9
Select “Start” (
/
then ENTER).
Auto Installation automatically starts.
To quit Auto Installation in progress, press
RETURN
.
Note
• You can start Auto Installation from the HOME MENU after
moving to another country, for example. Perform the following
steps before starting Auto Installation: Press
HOME MENU
,
select “Setup” (
/
then
ENTER
), then “Auto Installation” (
/
then
ENTER
). The password entry screen appears. Enter your
four-digit password using buttons
0
to
9
. For the password, see
• If no channel is found, check the antenna connections, and
then retry Auto Installation.
Setting up analogue TV channels
manually
Use the Manual Adjust function to set up analogue TV channels
manually.
1
Press HOME MENU.
2
Select “Setup” (
/
then ENTER).
3
Select “Analogue TV Setup” (
/
then ENTER).
The password entry screen appears. Enter your four-digit password
using buttons
0
to
9
. For the password, see
4
Select “Manual Adjust” (
/
then ENTER).
5
Select “Programme Entry” (
/
).
6
Select a programme number (
/
).
You can select 1 through 99.
7
Select “Search” (
/
).
8
Enter a frequency using buttons 0 to 9, then ENTER.
You can also press
/
to enter a frequency.
9
Select “System” (
/
).
10 Select a sound system (
/
).
You can select from among “B/G”, “D/K”, “I”, “L”, and “ L’ ”.
Auto Installation
Start
Country
Language
Tuner Type
Aerial Power
Installation
English
Austria
All
Off
Manual Adjust
Search
System
Programme Entry
Colour System
Store
Tuner NR
Channel Lock
Decoder
42.75MHz
B/G
Auto
Off
View
On
Yes
1
PDP-LX6090.book Page 27 Monday, February 25, 2008 10:08 AM
