English
Français
Italiano
Español
Nederlands
Deutsch
5
En
0
Basic playback
Here are the basic instructions for playing a source (such as a Blu-ray Disc) with your home theater system.
1
Switch on your system components and receiver.
Start by switching on the playback component (for example a Blu-ray Disc player), your TV, then the receiver (press
u
RECEIVER
).
2
Switch the TV input to the input that connects this receiver.
For example, if you connected this receiver to the
VIDEO
jacks on your TV, make sure that the
VIDEO
input is now
selected.
3
Press input function buttons to select the input function you want to play.
• The input of the receiver will switch over, and you will be able to operate other components using the remote
control.
• The input source can also be selected by using
INPUT SELECT
buttons on the remote control, or by using
the front panel INPUT SELECTOR dial. In this case, the remote control won’t switch operational modes.
• Press SIGNAL SEL to select the audio input signal corresponding to the source component (HDMI, digital or
analog).
4
Press AUTO/DIRECT to select ’AUTO SURROUND’ and start playback of the source.
If you’re playing a Dolby Digital or DTS surround sound Blu-ray/DVD disc, with a digital audio connection, you
should hear surround sound. If you’re playing a stereo source or if the connection is an analog audio connection,
you will only hear sound from the front left/right speakers in the default listening mode.
RECEIVER
SOURCE
SLEEP
TV
CONTROL
RECEIVER
RECEIVER
DTV/TV
PHASE
SIGNAL SEL
S.RETRIEVER
CH
VOL
DIMMER
INPUT
MIDNIGHT
HDD
+10
SPEAKERS
LEV
LEV
SB CH
TEST TONE
DVD
CH SELECT
VCR
SHIFT
1
2
DISP
3
4
5
6
CH
7
8
9
CH
CLR
0
ENTER
INPUT SELECT
BD
DVD
TV
DVR/BDR
CD
CD-R
ADAPTER
TUNER
PORTABLE
BD MENU
ADV SURR
AUTO/
DIRECT
ALC/
STANDARD
STEREO
MUTE
RETURN
AUDIO
PARAMETER
TUNER EDIT
TOOLS
BAND
MENU
HOME
MENU
SETUP
PTY SEARCH
TOP
MENU
TUNE
TUNE
PR
ES
ET
PR
ES
ET
ENTER
TRE
BASS
MASTER
VOLUME
1
3
4
7
A
A
B
6
B
A
5
A
A
Listening in Standard surround sound
This receiver provide basic surround sound for stereo and multichannel sources.
While listening to a source, press ALC/STANDARD repeatedly to select a listening mode.
Listening in Advanced surround sound
The Advanced surround effects can be used for a variety of additional surround sound effects.
While listening to a source, press ADV SURR repeatedly to select a listening mode.
5
Use MASTER /– to adjust the volume level.
• Sound can be switched off by pressing MUTE button.
6
Enjoy a variety of sounds.
Press S.RETRIEVER to switch the Sound Retriever feature ON or OFF.
• When audio data is removed during the compression process, sound quality often suffers from an uneven
sound image. The Sound Retriever feature employs new DSP technology that helps bring CD quality sound
back to compressed 2-channel audio by restoring sound pressure and smoothing jagged artifacts left over after
compression.
Other remote control functions
• The input of the receiver will switch over, and you will be able to operate other components using the remote
control. To operate the receiver, first press
RECEIVER
(
7
), then press the appropriate button to operate.
Use the "A" buttons to adjust the settings of this receiver and operate other devices.
Use the "B" buttons to operate TV. Operations are still possible even after pressing the
RECEIVER
button.
Listening to the radio
1
Press TUNER to select the tuner.
If necessary, press
BAND
to change the band (FM or AM).
2
Press
TUNE
to tune to a station.
• Press and hold
TUNE
for about a second. The receiver will start searching for the next station.
If you’re listening to an FM station but the reception is weak, press
BAND
to select
FM MONO
and set the receiver
to the mono reception mode.
Saving station presets
If you often listen to a particular radio station, it’s convenient to have the receiver store the frequency for easy recall
whenever you want to listen to that station.
1
Press TUNER EDIT while receiving a signal from the station you want to store.
The display shows
PRESET
, then a blinking
MEM
and station preset.
2
Press PRESET
l
(or number buttons) to select the station preset you want
,
then press ENTER.
The preset number stop blinking and the receiver stores the station.
Listening to station presets
You will need to have some presets stored to do this.
Press PRESET
l
(or number buttons) to select the station preset you want.
© 201
2
PIONEER CORPORATION.
All rights reserved.
• The following buttons are not used with this receiver:
– ADAPTER, PORTABLE
Canceling the Auto Power Down
When this receiver is not used over a period of
several hours, it will power down automatically. The
automatic power-off timer is set to six hours under
factory settings, and the timing can be changed or
the power-off function switched off altogether.
l
“The Auto Power Down menu”
