7 Plug the microphone into the micro-
phone input jack on this unit.
8 Press START to start the auto TA and
EQ.
9 Get out of the car and close the door
within 10 seconds when the 10-second
count-down starts.
The measurement tone (noise) is output from
the speakers, and auto TA and EQ begins.
#
When all speakers are connected, auto TA
and EQ is completed in about six minutes.
#
To stop auto TA and EQ, press
STOP
.
#
To cancel auto TA and EQ part way through,
press
EXIT
or
BAND
.
10 When auto TA and EQ is completed,
Complete is displayed.
When correct measurement of car interior
acoustic characteristics is not possible, an
error message is displayed. (Refer to
Under-
standing auto TA and EQ error messages
on
page 65.)
11 Press EXIT or BAND to cancel the auto
TA and EQ mode.
12Store the microphone carefully in the
glove compartment.
Store the microphone carefully in the glove
compartment or any other safe place. If the
microphone is subjected to direct sunlight for
an extended period, high temperatures may
cause distortion, color change or mal-
function.
Audio Adjustments
En
56
Section
11
