!
If you have to operate this unit unavoidably
when driving, look ahead carefully to avoid the
risk of being involved in a traffic accident.
!
If any of the following troubles occur, immedi-
ately stop using this unit and consult with the
dealer from whom you purchased it:
the unit is smoking.
the unit is emitting abnormal odor.
a foreign object has entered the unit.
liquid has been spilled on or into the unit.
If you continue to use this unit without finding
a remedy, the unit may be damaged badly, re-
sulting in a serious accident or fire.
!
Do not leave this unit free (unattached) inside
the car. When the car stops or turns a curve,
the unit might drop on the floor. If the unit
rolls under the brake pedal, it might prevent
the driver from braking well, causing serious
trouble. Be sure to fix this unit to the steering
wheel.
!
Do not disassemble or modify this unit. To do
so may cause a fault.
FUNCTION
button and
AUDIO
button
Operation of the
FUNCTION
button and the
AUDIO
button on the remote control differs
from the operation of the
FUNC
button and
the
AUDIO
button on the head unit. When op-
erating the head unit, use the
FUNC
button
and the
AUDIO
button to select the appropri-
ate menu, then use the multi-function buttons
to select the mode. When operating the re-
mote control, however, switch through the
modes as described below to select the mode.
FUNCTION
button operation
%
Press FUNCTION to select the desired
mode (e.g., built-in CD player).
Press
FUNCTION
repeatedly to switch be-
tween the following modes:
RPT
RDM
SCAN
T.LIST
PAUSE
TTLin
R.SRCH
T.READ
Note
Refer to
Introduction of advanced built-in CD
player operation
on page 20.
AUDIO
button operation
%
Press AUDIO to select the desired
mode.
Press
AUDIO
repeatedly to switch between
the following modes:
BAL
NW
POSI
T.AL
EQ 1
EQ 2
BBE
LOUD
ASL
SLA
F/B
LOUD
SFC
EQ 1
EQ 2
ASL
POSI
T.AL
A.EQ
SW1
SW2
HPF F
HPF R
SLA
Note
Refer to
Introduction of audio adjustments
on
page 44.
Before You Start
En
12
Section
01