M HPF
:
31.5
40
50
63
80
100
125
160
200
(Hz)
M LPF
:
1.6
2
2.5
3.15
4
5
6.3
8
10
12.5
16
(kHz)
H HPF
:
1.6
2
2.5
3.15
4
5
6.3
8
10
12.5
16
(kHz)
4 Press
a
or
b
to adjust the level of the
selected speaker unit (filter).
Each press of
a
or
b
increases or decreases
the level of the selected speaker unit (filter).
0dB
24dB
is displayed as the levelis in-
creased or decreased.
+6dB
24dB
is displayed as the levelis in-
creased or decreased, only if you haveselected
L LPF
.
5 Press SLOPE to select the slope of the
selected speaker unit (filter).
L LPF
:
12
18
6
(dB/oct.)
M HPF
:
12
18
Pass (0)
6
(dB/oct.)
M LPF
:
12
Pass (0)
6
(dB/oct.)
H HPF
:
12
6
(dB/oct.)
6 Press PHASE to switch the phase of the
selected speaker unit (filter).
Each press of
PHASE
switches the phase be-
tween normal
and reverse .
#
You can adjust the parameters for other
speaker units (filters) in the same way.
7 Press BAND to cancel the network ad-
justment mode.
Using subwoofer output
This unit is equipped with a subwoofer output
which can be switched on or off. When a sub-
woofer is connected to this unit, turn the sub-
woofer output on.
The subwoofer output phase can be switched
between normal and reverse.
1 Press AUDIO and NEXT and then press
SW1 to select the subwoofer output mode.
#
SW2
is displayed only when the subwoofer
output is on in the subwoofer output mode
(
SW1
).
2Press SW1 to turn subwoofer output
on.
SUB.W ON
appears in the display. Subwoofer
output is now on.
#
To turn subwoofer output off, press
SW1
again.
3 Press
c
or
d
to select the phase of sub-
woofer output.
Press
c
to select reverse phase. Press
d
to se-
lect normal phase.
Adjusting subwoofer settings
When the subwoofer output is on, you can ad-
just the cut-off frequency and the output level
of the subwoofer.
1 Press AUDIO and NEXT and then press
SW2to select the subwoofer setting mode.
2Press
c
or
d
to select cut-off frequency.
Each press of
c
or
d
selects cut-off frequen-
cies in the following order:
50
63
80
100
125
(Hz)
Only frequencies lower than those in the se-
lected range are output from the subwoofer.
3 Press
a
or
b
to adjust the output level
of the subwoofer.
Each press of
a
or
b
increases or decreases
the level of the subwoofer.
+6
24
is dis-
played as the level is increased or
decreased.
Audio Adjustments
En
49
English
Section
11