Message
Cause
Action
Error check
MIC
Microphone is
not connected.
Plug the supplied
microphone se-
curely into the
jack.
Error check
front SP
,
Error
check FL SP
,
Error check FR
SP
,
Error check
RL SP
,
Error
check RR SP
,
Error check
SW
The microphone
cannot pick up
the measuring
tone of any
speaker.
!
Confirm that the
speakers are con-
nected correctly.
!
Correct the input
level setting of the
power amp con-
nected to the
speakers.
!
Set the micro-
phone correctly.
Error check
noise
The surrounding
noise level is too
high.
!
Stop your car in
a place that is as
quite as possible,
and switch off the
engine, air condi-
tioner or heater.
!
Set the micro-
phone correctly.
A.TA&EQ una-
vailable
The operation
mode set to NW
mode.
The auto TA and
EQ function does
not work in NW
mode.
CD player and care
!
Use only CDs that have either of the two
Compact Disc Digital Audio marks as
shown below.
!
Use only normal, round CDs. If you insert ir-
regular, non-round, shaped CDs they may
jam in the CD player or not play properly.
!
Check all CDs for cracks, scratches or
warped discs before playing. CDs that have
cracks, scratches or are warped may not
play properly. Do not use such discs.
!
Avoid touching the recorded (non-printed
side) surface when handling the disc.
!
Store discs in their cases when not in use.
!
Keep discs out of direct sunlight and do
not expose the discs to high temperatures.
!
Do not attach labels, write on or apply che-
micals to the surface of the discs.
!
To clean dirt from a CD, wipe the disc with
a soft cloth outward from the center of the
disc.
!
If the heater is used in cold weather, moist-
ure may form on components inside the
CD player. Condensation may cause the CD
player to not operate properly. If you think
that condensation is a problem turn off the
CD player for an hour or so to allow the CD
player to dry out and wipe any damp discs
with a soft cloth to remove the moisture.
!
Road shocks may interrupt CD playback.
Additional Information
En
66
Appendix