Pioneer Elite VSX-35TX, Руководство по эксплуатации

Страница: 13 / 96

13
PREP
ARA
TION
Digital Connections
In order to use Dolby Digital/DTS soundtracks which are at the heart of home theater you need to make
digital audio connections. You can do this by either a coaxial or an optical connection (you don’t need to do
both). The quality of these two types of connections is the same but since some digital components only
have one type of digital terminal, it is a matter of matching like with like (for example, the coaxial out from
the component to coaxial in on the receiver). The VSX-35TX has two coaxial and three optical inputs for a
total of five digital inputs. For a DVD/LD player or LD player hook up see p.15. If possible hook up your
digital equipment in accordance with this receiver's default settings, see "Digital Input Assignment,"
below, in order to do this. We also recommend hooking up your digital components to analog audio jacks
in order to make recording from some digital sources which may be copy protected.
Connect your digital components as shown below.
There are two optical digital out jacks (the CD recorder is connected to one in the diagram below). If you
connect this to the optical input on a digital recorder (currently these include MD, DAT and CD-R) you can
make direct digital recordings with this unit.
Before making or changing the connections, switch off the power and disconnect the power cord from
the AC wall outlet.
*The arrows indicate the direction of the audio signal.
Connecting Your Equipment
(for DVD/LD player
hook up see p.15)
(not a PCM-only output)
CD recorder
OUTPUT
(PLAY)
INPUT
(REC)
DIGITAL
TV tuner
DVD player
OUTPUT
DIGITAL
OUTPUT
DIGITAL
CD player
OUTPUT
DIGITAL
Front DIGITAL IN connection is
accessed via the input selector
as "VIDEO"
Digital Input Assignment
Unlike analog connections, the jacks for digital connections are not dedicated to one type of component, they
can be used freely. Thus you must tell the receiver what digital componenet in which jack so your components
will be in sync with the the names on the remote control buttons and the like. To avoid having to assign the
digital inputs you can hook up your equipment in accordance with the receiver's default settings.
The default settings are:
DIGITAL IN 1: DVD/LD DIGITAL IN 3: CD-R
DIGITAL IN 2: CD DIGITAL IN 4: TV/SAT
You will notice that Digital IN 1, for example, is a coaxial jack. If your DVD/LD player only has an optical out jack
on it then you won't be able to hook up your components in accordance with the VSX-35TX default setting. In
this case you will need to assign the digital inputs. See Digital-In Select on p.30 in order to do this.