92
Techno Tidbits & Problem-solving
Specifications
Continuous average power output of
90 watts* per channel, min., at 8
ohms, from 20 Hz to 20,000 Hz with no
more than 0.09 %** total harmonic
distortion (front).
Continuous Power Output
Front ....... 90 W + 90 W (20 Hz – 20 kHz, 0.09 %, 8
Ω
)
Center ................. 90 W (20 Hz – 20 kHz, 0.09 %, 8
Ω
)
Rear ........ 90 W + 90 W (20 Hz – 20 kHz, 0.09 %, 8
Ω
)
Input (Sensitivity/Impedance)
PHONO MM ....................................... 4.7 mV/47 k
Ω
VCR 1/DVR, VCR 2, DVD/LD, TV/SAT, VIDEO, CD,
CD-R/TAPE 1/MD, TAPE 2 ................. 335 mV/47 k
Ω
Phono Overload level (T.H.D.0.1 %, 1kHz)
PHONO MM ................................................... 120 mV
Frequency Response
PHONO MM .................. 20 Hz to 20,000 Hz ± 0.3 dB
VCR 1/DVR, VCR 2, DVD/LD, TV/SAT, VIDEO, CD,
CD-R/TAPE 1/MD, TAPE 2 .... 5 Hz to 100,000 Hz dB
Output (Level/Impedance)
VCR 1/DVR REC, VCR 2 REC, CD-R/TAPE 1/MD REC,
TAPE 2 REC ......................................... 335 mV/2.2 k
Ω
Tone Control
BASS ................................................... ± 6 dB (100 Hz)
TREBLE ............................................... ± 6 dB (10 kHz)
LOUDNESS ............................ +10 dB (100 Hz/10 kHz)
Signal-to-Noise Ratio (IHF, short circuited, A network)
PHONO MM ...................................................... 80 dB
VCR 1/DVR, VCR 2, DVD/LD, TV/SAT, VIDEO, CD,
CD-R/TAPE 1/MD, TAPE 2, MULTI CH IN ........ 101 dB
Signal-to-Noise Ratio [EIA, at 1 W (1 kHz)]
PHONO MM ...................................................... 80 dB
VCR 1/DVR, VCR 2, DVD/LD, TV/SAT, VIDEO, CD,
CD-R/TAPE 1/MD, TAPE 2 .................................. 83 dB
*
Measured pursuant to the Federal Trade Commission’s
Trade Regulation rule on Power Output Claims for
Amplifiers.
** Measured by Audio Spectrum Analyzer.
VIDEO Section (S jack)
Input (Sensitivity/Impedance)
VCR 1/DVR, VCR 2, VIDEO, DVD/LD, TV/SAT
Luminance signal (Y) ............................. 1 Vp-p/75
Ω
Chrominance signal (C) ................... 0.286 Vp-p/75
Ω
Output (Level/Impedance)
VCR 1/DVR, VCR 2, MONITOR OUT
Luminance signal (Y) ............................. 1 Vp-p/75
Ω
Chrominance signal (C) ................... 0.286 Vp-p/75
Ω
Frequency Response
VCR 1/DVR, VCR 2, VIDEO, DVD/LD, TV/SAT
Luminance signal (Y) .............. 5 Hz to 10 MHz dB
Signal-to-Noise Ratio
Luminance signal (Y) ...................................... 65 dB
+0
–3
+0
–3
Component Video Section
Input (Sensitivity)
Y .............................................................. 1 Vp-p/75
Ω
P
B
/P
R
................................................................... 0.7 V
Output (Level/Impedance)
Y .............................................................. 1 Vp-p/75
Ω
P
B
/P
R
................................................................... 0.7 V
Frequency Response
Y ............................................... 5 Hz to 20 MHz dB
P
B
/P
R
.......................................... 5 Hz to 13 MHz dB
VIDEO Section (Composite)
Input (Sensitivity/Impedance)
VCR 1/DVR, VCR 2, VIDEO, DVD/LD,
TV/SAT ....................................................... 1 Vp-p/75
Ω
Output (Level/Impedance)
VCR 1/DVR, VCR 2, MONITOR OUT,
MONITOR OUT2 ....................................... 1 Vp-p/75
Ω
Frequency Response
VCR 1/DVR, VCR 2, TV/SAT, DVD/LD
VIDEO
=
MONITOR OUT, ........... 5 Hz to 10 MHz dB
Signal-to-Noise Ratio .............................................. 65 dB
FM Tuner Section
Frequency Range ......................... 87.5 MHz to 108 MHz
Usable Sensitivity ...... Mono: 13.2 dBf, IHF (1.3 µV/75
Ω
)
50 dB Quieting Sensitivity ....................... Mono: 20.2 dBf
Stereo: 38.6 dBf
Signal-to-Noise Ratio ................. Mono: 73 dB (at 85 dBf)
Stereo: 70 dB (at 85 dBf)
Distortion ...................................... Stereo: 0.5 % (1 kHz)
Alternate Channel Selectivity ................. 60 dB (400 kHz)
Stereo Separation ...................................... 40 dB (1 kHz)
Frequency Response ............... 30 Hz to 15 kHz (± 1) dB
Antenna Input ....................................... 75
Ω
unbalanced
AM Tuner Section
Frequency Range .......................... 530 kHz to 1,700 kHz
Sensitivity (IHF, Loop antenna) ......................... 350 µV/m
Selectivity ............................................................... 25 dB
Signal-to-Noise Ratio .............................................. 50 dB
Antenna ...................................................... Loop antenna
Miscellaneous
Power Requirements ............................. AC 120 V, 60 Hz
Power Consumption ................................ 400 W, 550 VA
Power Consumption in Standby mode .................. 1.0 W
AC Outlet SWITCHED (
×
2) ....... Total 100 W (0.8 A) MAX
Dimensions .................. 420 (W)
×
173 (H)
×
463 (D) mm
(16-9/16 (W)
×
6-13/16 (H)
×
18-1/4 (D) in.)
Weight (without package) ................. 15.0 kg (33 lb 1 oz)
Furnished Parts
FM wire Antenna ........................................................... 1
AM loop Antenna ........................................................... 1
“AA” IEC LR6 batteries ................................................. 2
Remote Control Unit ...................................................... 1
Operating Instructions ................................................... 1
NOTE:
Specifications and the design are subject to possible
modifications without notice, due to improvements.
Amplifier Section
+0
–3
+0
–3
+0
–3
Содержание Elite VSX-35TX
Страница 1: ...VSX 35TX Operating Instructions AUDIO VIDEO MULTI CHANNEL RECEIVER ...
Страница 94: ...94 Techno Tidbits Problem solving ...
Страница 95: ...95 Techno Tidbits Problem solving ...