Pioneer Elite SC-05 Скачать руководство пользователя страница 84

Страница: 84 / 138

Playback with HOME MEDIA GALLERY inputs

Photo files

Files of up to 12 M pixels can be played.

Advanced operations for Internet radio

Saving Internet radio stations

This receiver can remember the Internet radio stations
that you often listen to in 3 classes (A, B, and C) with up
to 10 stations in each class to make the total of 30
stations at its maximum capacity.

Before proceeding with the following steps, check
whether you have followed Steps 2 to 4 on page 76.

Set the operation selector switch to SOURCE.

Tune into the Internet radio station that you want

to save.

Tune into the desired Internet radio station by following
Steps 2 to 4 on page 76.

Press T.EDIT to switch to the station-saving mode.

Press CLASS to select the class that you want to

save the station in.

Select the desired class from A, B, and C.

Use

/

to select the number that you want to

save the station as, and then press ENTER.

You can also select the station number by using the
number buttons. Select the desired number from 0 to 9.

Retrieving saved Internet radio stations

You need to save Internet radio stations first before
retrieving them. If there are no Internet radio stations
currently being saved, see

Saving Internet radio stations

above and save at least one Internet radio station before
proceeding with the following steps.

Set the operation selector switch to SOURCE.

Select the class that you want to retrieve an

Internet radio station from.

Each time you press

CLASS

, the class switches to A, B,

and C in turn.

Use

/

to select the station number that you

want to retrieve.

You can also select the station number by using the
number buttons.

‘Preset Not Stored’

appears when you select an Internet

radio station currently not being saved.

Setting up the network

In case the router connected to the LAN terminal on this
receiver is a broadband router (with the built-in DHCP
server function), simply turn on the DHCP server
function, and you will not need to set up the network
manually. You must set up the network as described
below only when you have connected this receiver to a
server without the DHCP server function. Before you set
up the network, consult with your ISP or the network
manager for the required settings. It is advisory that you
also refer to the operation manual supplied with your

network component.

IP Address

The IP address to be entered must be defined within the
following ranges. If the IP address defined is beyond the
following ranges, you cannot play back audio files stored
on components on the network or listen to Internet radio
stations.
Class A: 10.0.0.1 to 10.255.255.254
Class B: 172.16.0.1 to 172.31.255.254
Class C: 192.168.0.1 to 192.168.255.254

Subnet Mask

In case an xDSL modem or a terminal adapter is directly
connected to this receiver, enter the subnet mask
provided by your ISP on paper. In most of the cases, enter
255.255.255.0.

Gateway IP

In case a gateway (router) is connected to this receiver,
enter the corresponding IP address.

DNS Server Preferred/DNS Server Alternate

In case there is only one DNS server address provided by
your ISP on paper, enter

‘DNS Server Preferred’

. In case

there are more than two DNS server addresses, enter

‘DNS Server Alternate’

in the other DNS server address

field.

Category

Extension