Pioneer Elite SC-05 Скачать руководство пользователя страница 105

Страница: 105 / 138

Controlling the rest of your system

105

Multi Operation and System Off

The Multi Operation feature allows you to program a
series of up to 5 commands for the components in your
system. For example, you could turn on your TV, turn on
your DVD player and start playing the loaded DVD using
only two buttons on the remote control.

Similar to multi operations, System Off allows you to use
one button to stop and switch off a series of components

in your system at the same time.

Programming a multi-operation or a
shutdown sequence

Set the remote control operation mode selector switch to

RCV

when you want to program this receiver’s

operations, to

SOURCE

when you want to program

operations of other components.

While pressing MULTI OPERATION, press HOME

MENU.

The remote LCD display shows

SETUP

Use

/

to select MULTI OP or SYS OFF from the

menu and press ENTER.

If you selected Multi Operation

(

MULTI OP

), the LCD on

the remote prompts you for an input source button.

If you selected System Off

(

SYS OFF

), go to step 4.

Press the input source button for the component

that will start the multi-operation, then press ENTER.

For example, if you want to start the sequence by
switching on your DVD player, press

DVD

Use

/

to select CODE EDT, then press ENTER.

To erase any previously stored multi-operations (or
shutdown sequences) select

CODE ERS

above.

Use

/

to select a command in the sequence, then

press ENTER.

If this is the first command in the sequence, select

1ST

CODE

. Otherwise, simply choose the next command in

the sequence.

PRES KEY

flashes after you press

ENTER

If necessary, press the input source button for the

component whose command you want to input.

This is only necessary if the command is for a new
component (input source).

Select the button for the command you want to

input.

The following remote control commands can be selected:

• You don’t need to program the receiver to switch on

or off. This is done automatically.

With Pioneer components

, you don’t need to:

• program the power to switch off in a shutdown

sequence (except DVD recorders);

• program the power to switch on if it’s the source

component selected in step 3;

• program a Pioneer TV or monitor to switch on if the

input function (selected in step 2) has video input
terminals;

These take priority in multi operations (not shutdown).

Repeat steps 5 to 7 to program a sequence of up to

five commands.

When you’re finished, use

/

to select EXIT from

the menu and press ENTER.

You will return to the remote control Setup menu. Select

* EXIT *

again to exit.

Note

1 • Before Multi Operation and System Off will work correctly, you must setup the remote to work with your TV and other components (see

Setting the remote to control other components

on page 102 for more on this).

• Some units may take some time to power up, in which case multiple operations may not be possible.
• Power on and off commands only work with components that have a standby mode.

DVD

RECEIVER

SOURCE

MAIN

MULTI

OPERATION

ZONE2

VIDEO1

GALLERY

HOME MEDIA

INPUT SELECT

HDMI