background image

 

Additional information

17

 

156

 

En

 

• Levels separated by a bold line show where there is a noticeable change in picture quality.

• Audio recording in all manual recording modes is in Dolby Digital 2 ch format, except for LPCM mode, which is 

in Linear PCM format.

• When recording to the HDD, recording for the times given will use approximately 4.7 GB of HDD space 

(equivalent to one recordable DVD).

 

• See also 

 

Recording

 

 on page 66.

 

Troubleshooting

 

Incorrect operation is often mistaken for trouble and malfunction. If you think there is 
something wrong with this component, please check the points below. Sometimes the 
trouble may lie in another component. Investigate the other components and electrical 
appliances being used. If the trouble cannot be rectified even after checking the points below, 
ask your nearest Pioneer authorized service center or your dealer to carry out repair work.

 

General

 

Problem

Remedy

The disc is 
automatically ejected 
after closing the disc 
tray

 

• Check that the disc is not an incompatible format disc (page 8).
• Check that the disc is loaded properly (aligned in disc tray and label-
side up).
• Take out the disc and clean it (page 166).
• Check that the disc has a region code compatible with the recorder.

 

Can’t play a disc

 

• Check that the disc is a compatible format disc (page 8).
• Take out the disc and clean it (page 166).
• Check that the disc is loaded properly (aligned in disc tray and label-
side up).
• There may be condensation in the recorder. Leave the recorder for 
an hour or so for the condensation to evaporate.
• During HDD recording, you can’t play discs that are recorded with a 
Line System different to the current recorder setting.
• DVD+R/+RW discs recorded using another recorder with copy-
once protected recordings will not play in this recorder.

 

Can’t record a disc

 

• Check that the disc is not an incompatible format disc (page 8).
• Some DVD-RAM discs are not recordable until they have been 
initialized (page 80). This can take up to 1 hour.

DVR940HX_UK_EN.book 156 ページ 2006年7月12日 水曜日 午後4時5分

Содержание DVR-440HX-S













































































































































































Отзывы: