Tuner
En
19
Listening to the radio
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on page 20.
This product’s AF (alternative frequencies
search) function can be switched on and off. AF
should be off for normal tuning operation (refer
to page 23).
1
STEREO
(
ST
) indicator
Shows that the frequency selected is being
broadcast in stereo.
2
BAND
indicator
Shows which band the radio is tuned to, MW,
LW or FM.
3
PRESET NUMBER
indicator
Shows what preset has been selected.
4
FREQUENCY
indicator
Shows to which frequency the tuner is
tuned.
1 Press
SOURCE
to select the tuner
.
Press
SOURCE
until you see
Tuner
displayed.
• Pressing
SOURCE
on the head unit also per-
forms the same operation.
2 Use
VOLUME
to adjust the sound level.
Press
VOLUME
to increase or decrease the vol-
ume.
• Rotating
VOLUME
on the head unit also
increases or decreases the volume.
3 Press
BAND/ESC
to select a band
.
Press
BAND/ESC
until the desired band is dis-
played,
FM1
,
FM2
,
FM3
for FM or
MW/LW
.
• Pressing
BAND/ESC
on the head unit also
performs the same operation.
4 To perform manual tuning, press
1
or
¡
with quick presses.
The frequencies move up or down step by step.
• Pressing
2
or
3
on the head unit also per-
forms the same operation.
5 To perform seek tuning, press and hold
1
or
¡
for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
• You can cancel seek tuning by pressing either
1
or
¡
with a quick press.
• If you press and hold
1
or
¡
you can skip
broadcasting stations. Seek tuning starts as
soon as you release the buttons.
• Pressing
2
or
3
on the head unit also per-
forms the same operation.
Note
• When the frequency selected is being broad-
cast in stereo the
STEREO
(ST) indicator will
light.
1
2 3
4
English
Español
Deutsch
F
rançais
Italiano
Nederlands
03
Section
