Audio Adjustments
En
61
Introduction of audio
adjustments
1
AUDIO
display
Shows the audio adjustments status.
2
Subwoofer indicator
Shows when the subwoofer is on.
Press
A
to display the audio function names.
Press
A
repeatedly to switch between the follow-
ing audio functions:
Fad
(balance adjustment)—
EQ
(equalizer curve
adjustment)—
Bass
(bass)—
Treble
(treble)—
Loud
(loudness)—
Sub-W1
(subwoofer1)/
Non Fad
(non fading output on/off)—
Sub-W2
(subwoofer2)/
Non Fad
(non fading output set-
ting)—
HPF
(high pass filter)—
SLA
(source level
adjustment)
• When the subwoofer controller setting is only
S.W Control:EXT
, you cannot switch the
Sub-W1
.
(Refer to page 82.)
• You can select the
Sub-W2
only when
Subwoofer output is switched on in the
Sub-W1
.
• When the subwoofer controller setting is only
S.W Control:EXT
, you can switch the non fading
output on/off mode. (Refer to page 82.)
• You can select the non fading output setting
mode only when non fading output is switched
on in the non fading output on/off mode.
• Pressing
AUDIO
on the head unit also per-
forms the same operation.
• When selecting the FM tuner as the source,
you cannot switch to
SLA
.
• To return to the playback display, press
BAND/ESC
.
Important
• If the Multi-channel processor (DEQ-P7000) is
connected to this unit, the audio function will
be changed into the Multi-channel proces-
sor’s audio menu. For details, see the Multi-
channel processor (DEQ-P7000) owner’s
manual.
Notes
• If you do not operate the audio function within
about 30 seconds, the display is automatically
returned to the source display.
• Audio menu functions change depending on
the rear output setting in the initial setting
menu. Refer to
Setting the rear output and
subwoofer controller
on page 82.
1
2
English
Español
Deutsch
F
rançais
Italiano
Nederlands
09
Section