Problems duringVideo CD playback
Symptom
Cause
Action (See)
The PBC (playback control)
menu display cannot be called
up.
The Video CD playing does not fea-
ture PBC.
This operation is not possible with Video CDs
not featuring PBC.
PBC is turned off.
Turn PBC on. (Page 27, Page 29)
Repeat play and track/time
search are not possible.
PBC is turned on.
Turn PBC off. (Page 27, Page 29)
Error messages
When problems occur with disc playback, an error message appears on the display. Refer to the
table below to identify the problem, then take the suggested corrective action. If the error persists,
contact your dealer or your nearest PIONEER Service Center.
Error messages
Message
Cause
Action (See)
ERROR-02
Dirty disc
Clean disc.
Scratched disc
Replace disc.
TEMP
The temperature of this unit is out-
side of the normal operating range
Wait until the unit
s temperature returns to
within normal operating limits.
ERROR-10
The disc does not have the same re-
gion number as this unit
Replace the DVD video with one bearing the
correct region number.
NON PLAY
This type of disc cannot be played
by this unit
Replace the disc with one this unit can play.
The disc is loaded upside down
Check that the disc is loaded correctly.
ERROR-05
Electrical or mechanical
Turn the ignition ON and OFF, or switch to a
different source, then back to the DVD player.
Error messages on the display
Message
Cause
Action (See)
ERROR-02
Dirty disc
Clean disc.
Scratched disc
Replace disc.
THERMAL PROTECTION IN
MOTION
The temperature of this unit is out-
side of the normal operating range
Wait until the unit
s temperature returns to
within normal operating limits.
DIFFERENT REGION DISC
The disc does not have the same re-
gion number as this unit
Replace the DVD video with one bearing the
correct region number.
NON-PLAYABLE DISC
This type of disc cannot be played
by this unit
Replace the disc with one this unit can play.
The disc is loaded upside down
Check that the disc is loaded correctly.
Additional Information
En
79
Appendix
Additional
Information
