are connected to full range speakers (when
R-SP :FUL
is selected), you can connect the
RCA subwoofer output to a subwoofer. In this
case, you can select whether to use the sub-
woofer controller
s (low pass filter, phase)
built-in
P/O :S/W
or the auxiliary
P/O :FUL
.
1 Press F to select R-SP.
Press
F
repeatedly until
R-SP
appears in the
display.
2 Press
r
or
q
to switch the rear out-
put setting.
Pressing
r
or
q
will switch between
R-SP :FUL
(full-range speaker) and
R-SP :S/W
(subwoofer) and that status will be displayed.
#
When no subwoofer is connected to the rear
output, select
R-SP :FUL
.
#
When a subwoofer is connected to the rear
output, set for subwoofer
R-SP :S/W
.
#
When the rear output setting is
R-SP :S/W
,
you cannot change the subwoofer controller.
3 Press
m
or
n
to switch the subwoo-
fer output or non fading output.
Pressing
m
or
n
will switch between
P/O :S/W
and
P/O :FUL
and that status will
be displayed.
Notes
!
Even if you change this setting, there is no
output unless you turn the non fading output
(refer to
Using non fading output
on page 55)
or subwoofer output (refer to
Using subwoofer
output
on page 54) in the audio menu on.
!
If you change the subwoofer controller, sub-
woofer output and non fading output in the
audio menu return to the factory settings.
Switching the telephone
muting/attenuation
Sound from this system is muted or attenu-
ated automatically when a call is made or re-
ceived using a cellular telephone connected to
this unit.
1 Press F to select TEL.
Press
F
repeatedly until
TEL
appears in the dis-
play.
2 Press
m
or
n
to switch the tele-
phone muting/attenuation.
Pressing
m
or
n
will switch between
TEL :ATT
(attenuation) and
TEL:MUT
(muting)
and that status will be displayed.
#
When the multi-channel processor (e.g., DEQ-
P7050) is connected to this unit, you can select in
the following setting:
!
TEL:MUT
Muting
!
TEL :A20
Attenuation (
TEL :A20
has a
stronger effect than
TEL :A10
)
!
TEL :A10
Attenuation
Notes
!
The sound is turned off,
MUTE
or
ATT
is dis-
played and no audio adjustment is possible.
!
Operation returns to normal when the phone
connection is ended.
Switching the automatic
disc playback
You can turn automatic disc playback on or off
when you insert a disc into the disc loading
slot. When this function is on, the disc will be
automatically played after it is inserted into
the disc loading slot.
Initially, this function is set to on.
Initial Settings
En
73
Section
14
Initial
Settings