Pioneer DV-AX10, Руководство по эксплуатации

Страница: 45 / 76

45
Advanced Functions
ADV
ANCED FUNCTIONS
En
To display all of the settings at once
Pressing DISPLAY while the picture quality setting adjustment screen
is displayed enables all of the current settings to be viewed on one
screen. Adjustments may also be made when this screen is displayed,
by moving the
cursor control joystick up and down to select a
setting, and right and left to adjust the selected setting.
[Prog Motion]
This setting is effective for progressive scan output. Adjust for the
level of motion occurring in the overall picture.
[Pure Cinema]
Sets the progressive scan circuitry and DNR operation appropriately
for playback of DVD-Video discs recorded from a film master. Normally
this function should be set to
“Auto” . Set [Pure Cinema] setting to
“On” or “Off” if images on the screen are not clear (refer to below
column).
[YNR]
Cuts the amount of digital noise in the Y (luminance) component of the
video signal.
[CNR]
Cuts the amount of digital noise in the C (color) component of the
video signal.
[NR]
Cuts the amount of digital noise in the picture. This setting is no effect
for progressive scan output.
[Sharpness High]
Adjusts the sharpness of the picture in the upper frequency range.
[Sharpness Mid]
Adjusts the sharpness of the picture in the middle frequency range.
[Detail]
Adjusts the edges in the picture.
[White Level]
Adjusts the brightness of the lighter images in the picture.
[Black Level]
Adjusts the brightness of the darker images in the picture.
[Black Setup]
Adjusts the dynamic range of the darkness and lightness of black
images in the picture.
[Hue]
Adjusts the red and green balance in the picture.
[Chroma Level]
Adjusts the depth of the colors in the picture. This setting is effective
with animation and other sources with very colorful presentations.
[Chroma Delay]
Adjust the delay of the Y (luminance) and C (color) components of the
video signal.
Memory Off 3 2 1
Prog Motion fast slow
Pure Cinema
Auto On Off
YNR off max
off max
CNR
off max
NR
Sharpness High
soft fine
soft fine Sharpness Mid
off max Detail
Page 1/2
Memory Off 3 2 1
White Level min max
min max Black Level
Black Setup
0 IRE 7.5 IRE
green red Hue
min max
Chroma Level
Chroma Delay
– +
Page 2/2
The “Pure Cinema” mode
DVD-Video discs are recorded using one of two types of video signal:
“Video Master” signals are recorded at a rate of 30 frames per
second.
“Film Master” signals are recorded at a rate of 24 frames per second.
When a movie is shot, the film records the action at a rate of 24 frames
per second (24 Hz). When DVD-Video discs are recorded using a film
master, the
[Pure Cinema] mode can convert these 24 recorded
frames per second into a 60 frame per second progressive scan
presentation resulting in a video image that best reflects the original
film as recorded to the disc. Therefore, you can enjoy watching a
cinematic presentation clearly and true to the original.
Generally, you will be able to enjoy watching movies and other
presentations with
[Pure Cinema] set to “Auto” . However, if the video
image is jagged or shakes during playback of certain discs, switch the
[Pure Cinema] setting to either “On” or “Off” .
You can confirm whether or not a DVD-
Video disc is recorded using a film master
(24 frames per second) on the disc
information screen.
When a 24 frame per second film master
progressive video image is recorded on
the DVD Video disc,
“#” is displayed.
To display the disc information screen,
press
DISPLAY on the remote control.
Press DISPLAY repeatedly to display the
screen shown above ( page 61 ).
Play #
Tr. Rate :
1–1 1.19
8.9
Note
If the Picture quality setting adjustment
screen is opened during playback of a DVD
being viewed in the letter box format, the
screen may switch to the wide screen
format. This is not a malfunction, and the
screen will return to normal when the
Picture quality setting adjustment screen is
closed.