Pioneer DV-AX10, Руководство по эксплуатации

Страница: 29 / 76

29
Adjusting Audio and Video Settings
ADJUSTING AUDIO AND VIDEO SETTINGS
En
Setting the Digital Audio Output To Be Compatible with Your AV Component
– DVD
This player is capable of digital audio output for Dolby Digital, DTS, MPEG, and Linear PCM signals with a sampling rate
of 96 kHz. Make settings in the Setup screen
Audio 1 menu to reflect the capabilities of the components that you have
made digital connections to.
Notes
• If you have already completed the Setup Navigator screen operations, the settings on this page have already been set by the
player.
• If you have made only stereo line connections (analog) using the supplied audio cord, it is not necessary to make any
changes in this menu.
DTS Out -
Linear PCM Out – Down Sample On
MPEG Out – MPEG
3
PCM
Digital Out – On
Audio1 General Language Video 2
Move Exit
Dolby Digital
3
PCM
Dolby Digital
SETUP
Dolby Digital Out
Dolby Digital Out –
DTS Out
Linear PCM Out - 96kHz>48kHz
MPEG Out – MPEG
3
PCM
Audio1 General
Language
Video
2
Move Exit
DTS
Off
Dolby Digital
SETUP
Digital Out – On
MPEG Out - PCM
Dolby Digital Out –
DTS Out –
Linear PCM Out
Audio1
General Language Video 2
Move Exit
Down Sample Off
Down Sample On
Dolby Digital
Off
SETUP
Digital Out – On
This player is capable of outputting the Dolby Digital surround sound
audio signal. When the player is connected to an AV component that
has a built-in Dolby Digital decoder, select
“Dolby Digital” . This player
can also convert the Dolby Digital signal to a digital Linear PCM signal,
the same digital signal output from a CD. Select
“Dolby Digital
3
PCM” when you have made connections to an amplifier or receiver
with a Dolby Pro Logic decoder or a Digital Analog Converter (DAC).
Settings: Dolby Digital (Factory setting)
Dolby Digital
3
PCM
Dolby Digital Out
DTS Out
This player is capable of outputting DTS digital audio for DVDs
recorded in DTS. When this player is connected to an AV component
that has a built-in DTS decoder, select
“DTS” . If your system is not
equipped to decode DTS, select “Off” . Refer to the operating
instructions supplied with your audio components if you are unsure
about compatibility with DTS.
Settings: Off (Factory setting)
DTS
Note
If you have made digital audio connections to component(s) not equipped
to decode the DTS digital bitstream, be sure to select
“Off” . If a DTS signal
is output without decoding, the output is digital noise that could
potentially cause damage to your speakers.
Linear PCM Out
This player is capable of outputting digital signals with a sampling
frequency of 96 kHz. If you have made connections to a component
capable of processing this signal rate, select
“Down Sample Off” for
the signal to be output as is. As some components are incapable of
processing digital signal input with sampling rates of 96 kHz, selecting
“Down Sample On” compresses the signal to a standard signal with
a sampling rate of 48 kHz/44.1 kHz.
Settings: Down Sample On (Factory setting)
Down Sample Off
Notes
• On DVDs that contain copy protection, the 96 kHz signal may only be
output from the analog audio jacks. When this type of disc is
encountered, even if
“Down Sample Off” is selected, the player
automatically outputs the digital audio signal at a compressed rate of
48 kHz/44.1 kHz.
• Changes to the [Linear PCM Out] setting cannot be made when a disc is
playing.