Pioneer DV-AX10, Руководство по эксплуатации

Страница: 18 / 76

Making Connections
18
En
2 CHANNEL AUDIO OUT
• Make analog audio connections to a stereo amplifier
or receiver.
• Analog audio connections can also be made to a TV
or monitor with stereo input jacks.
• Use the supplied audio cable to connect one of the
AUDIO OUT FRONT jacks on the player to the audio
input on the stereo amplifier or receiver.
• When making analog audio connections, be sure to
match the color of the plugs with the color of the
jacks (red and white).
• When making this kind of connection, be sure to
select “2 Channel” in the Setup Navigator [Analog
Jacks] screen ( page 21 ).
Stereo
amplifier or
receiver
R L
SURROUND
SUB
WOOFER
CENTER
CONTROL
IN OUT
AUDIO OUT
BALANCE
1 - GND
2 - HOT (+)
3 - COLD (-)
FRONT
OPT
2COAX 1COAX
PCM
R
L
DIGITAL OUT
PDIF
OFF ON
2
1
Y P
B
P
R
525i
(480i)
525p
(480p)
2
1
menu
select
VIDEO OUT COMPONENT VIDEO OUT S-VIDEO OUT
R L
AUDIO OUT
R L FRONT
AV amplifier or
receiver
R L
SURROUND
SUB
WOOFER
CENTER
CONTROL
IN OUT
AUDIO OUT
BALANCE
1 - GND
2 - HOT (+)
3 - COLD (-)
FRONT
OPT
2COAX 1COAX
PCM
R L
DIGITAL OUT
PDIF
OFF ON
2
1
Y P B P R 525i
(480i)
525p
(480p)
2
1
menu
select
VIDEO OUT COMPONENT VIDEO OUT S-VIDEO OUT
R L FRONT
SURROUND
SUB
WOOFER
CENTER
AUDIO OUT
R L
R
L
AUDIO OUT (5.1 CH)
FRONT REAR CENTER
SUB
WOOFER
Analog Audio Connections
After making physical connections to either the AUDIO OUT FRONT or Multichannel AUDIO OUT analog jacks, be
sure to identify which output you are going to be using in the [Analog Jacks] screen of the Setup Navigator ( page 21 ).
You can also manually set the output in the [Audio Out] setting of the Setup screen Audio 2 menu ( page 31 ).
5.1 CHANNEL AUDIO OUT
5.1 channel audio refers to the current industry surround
sound standard requiring two front speakers, a center
speaker, two surround (rear) speakers and a sub woofer.
Although in actuality there are 6 channels, because the
sub woofer channel, or LFE channel, makes up a mere
fraction of the total audio soundtrack, it has been
designated as the 0.1 of the 5.1 system.
By utilizing the player’s internal multichannel audio
decoder, the audio of Dolby Digital, DTS and MPEG
DVDs can be output from the 5.1 channel discrete
outputs to an AV amplifier or receiver with 5.1 channel
input capability.
• Use audio cables to make connections from the
player’s Multichannel AUDIO OUT jacks to the
equivalent input jacks on the AV amplifier or receiver.
This type of amplifier or receiver may be referred to
as “multichannel ready” or “Dolby Digital ready”.
• When making 5.1 channel analog audio connections,
be sure to match the left and right channels on both
components, and also make sure that the jacks of all
the channels are connected correctly on both
components.
• Either 2 single audio cords or a stereo cord may be
used to connect the CENTER and SUB WOOFER
channels to the AV amplifier or receiver.
• When making this kind of connection, be sure to
select “5.1 Channel” in the Setup Navigator [Analog
Jacks] screen ( page 21 ).
R L
SURROUND
SUB
WOOFER
CENTER
CONTROL
IN OUT
AUDIO OUT
BALANCE
1 - GND
2 - HOT (+)
3 - COLD (-)
FRONT
OPT
2COAX 1COAX
PCM
R L
DIGITAL OUT
PDIF
OFF ON
2
1
Y P
B P R 525i
(480i)
525p
(480p)
2
1
menu
select
VIDEO OUT
COMPONENT VIDEO OUT
S-VIDEO OUT
R L
R L FRONT
AUDIO OUT
BALANCE
BALANCE IN
1.GND
2.HOT (+)
3.COLD (-)
OFF ON
Stereo
amplifier or
receiver
2 Connecting using commercially
available 3-pin XLR-type cables
After connecting using this type of cable, set the
BALANCE switch to ON .