2. Combo FX
As long as you hold the Combo FX pad, both effect and filter are enabled all at once. You can activate an effect
along with attenuating the volume to effectively develop the music by adding accents and intonation to the track.
Basic operations
First, let's look at how the effects are assigned to Pads.
Each effect is assigned Pads to control the effect as shown in Figure 2-1.
As the figure shows, each effect can be assigned to 2 pads.
Different parameters can be assigned to each pad.
Details of parameters will be described later.
Pad4 and Pad8 controls only FX BEATS.
◆
Serato DJ has 2 effect modes, "Multi FX mode" and "Single FX mode".
Combo FX can be used only in "Multi FX mode".
Figure 2-1 Function assignment
FX(1)
FX(2)
FX(3)
FX BEATS
Pad1
Pad2
Pad3
Pad4
Pad5
Pad6
Pad7
Pad8
BEATS
UP
BEATS
DOWN
FX(1)
FX(2)
FX(3)
6
Figure 2-1 Function assignment
Now, let's start Combo FX.
Display the [FX] panel using either one of the following methods.
◆
Press the browse encoder with the Shift button for several time until the [FX] panel appears.
◆
Click on the [FX] button on the computer screen.
Figure 2-2 Selecting an effect type
As shown in Figure 2-2, select Echo for FX(1), Reverb for FX(2) and Delay for FX(3).
You can select effect types in either of the methods below.
◆
Press an Effect [ON[ button while pressing the Shift button for several times until an effect you want to choose is shown .
◆
Select and click an effect from the dropdown menu on the computer screen.
FX(1)
FX(2)
FX(3)
FX(1)
FX(2)
FX(3)
Echo
Reverb
Delay
Echo
Reverb
Delay
6
