4. Sampler Roll
As long as you hold these pads continuously, sampler is automatically rolled in sync with the track's BPM.
A drum roll sound, which used to be difficult to create only by pads, can be easily created just by holding these pads.
First of all, look at how Sampler is assigned to each Pad.
Sampler is assigned as shown in Figure 4-1 and Sampler Roll mode can control Sampler playback in the same
way as in Sampler mode.
◆
Pad7 and Pad8 are not used in Sampler Roll.
Figure 4-1 Function assignment
Let's use the Sampler Roll features.
Display the [SP-6] panel using either one of the following method.
◆
Press the browse encoder with the Shift button for several times until the [SP-6] panel appears.
◆
Click the [SP-6] button on the computer screen.
Pad1
Pad2
Pad3
Pad4
Pad5
Pad6
Pad7
Pad8
Slot1
Slot2
Slot3
Slot4
Slot5
Slot6
Slot1
Slot2
Slot3
Slot4
Slot5
Slot6
19
◆
Click the [SP-6] button on the computer screen.
Figure 4-2 Setting Sampler
Load a track (Sample sound) to the Sampler Slot in either one of the following methods.
◆
Select a track and press a Pad (empty slot) while pressing the Shift button.
◆
Drag & drop a track using the mouse on the computer screen.
Short phrase, instrumental and effect sound in a few seconds up to 10 and odd second length of track (Sample sound)
would be good to load to the Sampler Slot.
LOOPMASTERS' free sample collection, "Loopmasters sample content", is bundled with Serato DJ 1.5.
If you do not have any sample sound, you can use samples in this free sample collection.
◆
Please see [9. How to install Sample collection] for further details of the free sample collection.
Let's load tracks (Sample sound) to all the Slots 1 - 6.
19
