Next, press and hold Pad 4 continuously.
As long as the Pad is pressed, "outputting the sound" and "cutting the sound" is repeated in each 1/2 beat of the track's BPM as shown below.
The length of cutting the sound is 1/4 beat.
:Press and hold Pad 4
Each Pad has different length of cutting the sound.
Try other Pads how they work in different beat length.
While the Pad is pressed, the beat length is displayed in the Beat Indicator.
◆
However, 1/3 beat is not displayed.
◆
While
Pad 8 (Manual) is pressed, the sound is cut regardless of the beat.
Trans Pad can be effectively used with scratch.
Now, I will show you how Trans Pad is used with scratch using specific examples.
This combination is used in a short period within only 1 beat during SLIP mode.
The combination of the JOG and Pad 3 will be effective in the Example below.
Example
Select SLIP mode.
Press Pad3 only for 1 beat from the beginning of a bar and repeat this process for several times.
Press Pad3 and pull the Jog toward you at the same time. Then, release your fingers from Pad 3 and
from the Jog simultaneously. Lastly, disable the SLIP mode.
1/2 beat
Slip Scratch & Trans Pad
: Press Pad 3
: Pull the JOG
22
