<ENGLISH>
DOOR SWITCH (White/yellow)
Grounding Type Switch:
GM, Chrysler, Japanese and most European vehicles.
Note:
• Set DFS Alarm to recognize ground trigger from DFS Alarm Setting Menu. Set Door System to
“Door System: Negative, Current mode: Close”.
Fig. 4
This Product
White/yellow
Brown (refer to “ALARM OUTPUT”.)
Fuse holder
Dome light
Factory Door Switches
DFS Alarm Installation
Affix the included deterrent stickers to the inside of the front door windows.
Description
7
White/yellow (DOOR SWITCH) ........................................................................ (Fig. 4 & 5)
This lead is used to trigger DFS Alarm when any door is opened and may be connected to
either positive or negative (+/–) type door pin switches.
7
Brown (ALARM OUTPUT) ........................................................................................ (Fig. 6)
This lead is a pulsed positive (+) output capable of driving up to 2 relays (500 mA) max.
Use this lead to trigger relays for siren, horn, honk or flashing lights.
Door Switches
The DFS Alarm’s door trigger input is designed to work with either positive or negative
door pin switches. After hookup, simply set door system type from DFS Alarm Setting
Menu.
Domelight Delay-DFS Alarm will wait for last door to close and courtesy light to turn off
before Exit Delay Timer Starts.
CAUTION
• Because of the complexity of today’s technically advanced vehicle wiring sys-
tems, we recommend that your DFS Alarm be installed ONLY by a professional
Pioneer installer.
Fig. 3
7
When using a Subwoofer without using a different amp (sold separately)
<ENGLISH>
Connecting the Units
+
≠
+
≠
+
≠
Subwoofer output
Multi-CD player
(sold separately)
Rear output
Front output
Subwoofer
Right
Front speaker
White
Gray
White/black
Green
Green/black
Gray/black
Violet
Violet/black
Front speaker
Left
Do not connect anything to these speaker leads.
Yellow
To terminal always supplied
with power regardless of
ignition switch position.
Orange
To lighting switch terminal.
Red
To electric terminal controlled by
ignition switch (12 V DC) ON/OFF.
White/yellow
Brown
See the section “DFS Alarm
Installation”.
Black (ground)
To vehicle (metal) body.
Fuse holder
Note:
Change the Initial Setting of this product.
(Refer to the Operation Manual.)
IP-BUS input (Blue)
Antenna jack
This Product
IP-BUS cable
Fuse resistor
Fuse resistor
Fuse holder
Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
Blue/white
To Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
