Displaying BD (Bluetooth
Device) address
1
Use MULTI-CONTROL to select
Device info. in the function menu.
The device name (e.g.,
Pioneer BT unit
) of this
unit appears in the display.
#
You can edit the device name. Refer to
Editing
device name
on page 47.
2
Push MULTI-CONTROL left to switch to
the BD address.
12-digit hexadecimal string is displayed.
#
Pushing
MULTI-CONTROL
right returns to the
device name.
Bluetooth Telephone
Basic Operations
If your cellular phone features Bluetooth wire-
less technology, you can connect to this unit
for hands-free, wireless calls, even while driving.
Important
!
Since this unit is on standby to connect with
your cellular phones via Bluetooth wireless
technology, using this unit without running
the engine can result in battery drainage.
!
Advanced operations that require your atten-
tion such as dialing numbers on the monitor,
using phone book, etc., are prohibited while
you are driving. When you need to use these
advanced operations, stop your vehicle in a
safe place and operate.
!
When phone is selected as a source, no audio
adjustments, except balance adjustment, are
possible. The front/rear speaker balance is set
to
F 15
by default for the phone source.
These are the basic operations to use hands-
free phoning via Bluetooth wireless technol-
ogy. More advanced hands-free phoning op-
erations are explained starting on
Introduction
of advanced operations
on page 29.
1
Device name
Shows the device name of the cellular phone.
2
Signal level indicator
Shows the signal strength of cellular phone.
!
Signal level indicator may differ from
the actual signal level.
!
If the signal level is not available, this in-
dicator is not displayed.
3
User number indicator
Operating this unit
En
26
Section
02
