Using a cellular phone to initiate a
connection
Putting the unit in
CONNECTION OPEN
mode
allows you to establish a Bluetooth wireless
connection from your phone. You may need to
refer to the operation manual that came with
your phone if you are unsure how to initiate a
connection from your phone.
1
Use MULTI-CONTROL to select
CONNECTION OPEN in the function menu.
2
Press MULTI-CONTROL to open the con-
nection.
CONNECT WAITING
is displayed and the unit
is now on standby for connection from cellular
phone.
3
Use cellular phone to connect to this
unit.
#
Operation varies depending on the type of
your cellular phone. Refer to the instruction man-
ual that came with your cellular phone for de-
tailed instructions.
#
You may need to enter the link code on your
cellular phone to complete the connection.
#
The link code is set to
0000
as default. You
can change this code in the initial setting. Refer
to
Entering PIN code for Bluetooth wireless con-
nection
on page 41.
Disconnecting a cellular phone
When you are done using your phone with this
unit, you can close the Bluetooth wireless con-
nection.
1
Use MULTI-CONTROL to select
DISCONNECT PHONE in the function menu.
Device name of the connected phone appears
in the display.
2
Press MULTI-CONTROL to disconnect a
cellular phone from this unit.
After the disconnection is completed,
DISCONNECTED
is displayed.
Registering connected cellular
phone
You can register a phone that is temporarily
connected to this unit in order to take full ad-
vantage of the features available with Blue-
tooth wireless technology. A total of three
phones can be registered.
1
Use MULTI-CONTROL to select
SET PHONE in the function menu.
2
Push MULTI-CONTROL up or down to
select a registration assignment.
P1
(user phone 1)
—
P2
(user phone 2)
—
P3
(user phone 3)
#
As you select each assignment, you can see
whether or not a phone is already registered
there. If the assignment is empty,
NO DATA
is
displayed. If the assignment is already taken, the
device name appears. To replace an assignment
with a new phone, first delete the current assign-
ment. For more detailed instructions, see
Deleting
a registered phone
on this page.
#
If you need to know the BD (Bluetooth Device)
address of the phone, push
MULTI-CONTROL
left
here.
3
Press MULTI-CONTROL to register the
currently connected phone.
When the registration is completed,
REG COMPLETED
is displayed.
#
If the registration failed,
REG ERROR
is dis-
played. In this case, return to step 1 and try
again.
Deleting a registered phone
If you no longer need to use a registered
phone with this unit, you can delete it from the
registration assignment for another phone.
!
If a registered phone is deleted from this
unit, the Phone Book and other settings of
that phone are cleared simultaneously.
1
Use MULTI-CONTROL to select
DELETE PHONE in the function menu.
Operating this unit
En
25
English
Section
02
